Johnson Controls P100AP-2 60#CutIn 35#CutOut AutoReset 60#CutIn 35#CutOut AutoR

60#CutIn 35#CutOut AutoReset

Johnson Controls P100AP-2 60#CutIn 35#CutOut AutoReset 60#CutIn 35#CutOut AutoR

The Johnson Controls P100AP-2 60#CutIn 35#CutOut AutoReset 60#CutIn 35#CutOut AutoR is designed for HVAC, refrigeration and plumbing applications. Features include: Manual reset; Type: PTC (positive temperature coefficient) thermistor; Voltage: 30vdc; Current: 2A; Resistance: 120 ohms; Temperature Range: -40 to +390 F (-40 to +200 C); Features/Benefits: PTC type; 60 # Cut-in / 35 # Cut-out; Dimensions (W x D x H): 1 x 2

Electronic air cleaner models Johnson Controls P100AP-2 60#CutIn 35#CutOut AutoReset 60#CutIn 35#CutOut AutoR are designed for home, commercial and light industrial applications. This range of electronic air cleaners features the patented, proven Emerson® MicroVue® Electronic Air Cleaner with built in heat sensor technology for energy efficient operation.

The Johnson Controls P100AP-2 with CutOut and AutoReset controls with an audible alarm, is an Air Purifier that features: Washable and Removable HEPA and carbon filters provide ultimate allergen control, Quiet operation with variable speed, Auto Reset protection in the event of a power outage, Convenient front service grille for easy access to HEPA and carbon filters for cleaning

When you need to open up sectional doors or close single panel doors, it can be time consuming because of the difficulty in feeding chain through the chain holders. The new P100AP will quickly cut chain, reset itself for the next cut without tools, and remove chain from the track easily. The two-speed gearbox allows the door to travel faster which reduces the amount of time that doors are out of service. CutOut feature allows manual cutting of chain or tracks with a quick hand movement back to the neutral position.

The P100AP-2 and P100AP-2R safety disconnects protect personnel and property by providing a circuit-breaker type of safety mechanism to automatically turn off electrical power when there is a continuity problem due to an arc, fault, overcurrent or short circuit. This model differs from the P100AP style in that it has a set point control device which allows setting the AutoReset limit via a manual range selector. The AutoReset limits are stored into the unit's memory until they are changed again. This feature permits unattended operation in applications where high reset limits or high timing limits cannot be tolerated.

A two button reset model. This portable, plug-in unit has a count down time from 35 seconds to zero, with a separate red light for each circuit.

The High-energy P100AP explosion proof arc welding machine with 1.5L tank and 17"/400mm disc travel is ideal for welding on thin steel plates for general maintenance, repair and plant necessities; operating mode 1: constant current; operating mode 2: grind and weld; arc force: 1.5-6.0kg; high frequency: 12KHz; 1/2" (13mm) electrode grinds and works continuously; field reversible torch position – main handle can be switched left or right; The back cover can be opened to replace the electrode without stopping work, cut off sparks function(

The Eco-Save P100AP-2 is designed to provide reliable arc protection for an easy, electric arc start without the need for additional starter coils. The autoreset function automatically resets the tungsten output after tungsten impact. A hybrid tungsten design uses a combination of constant current and resistive heating, which provides fast arc starting. Oil-filled bushings are used in both ends to improve ruggedness and reduce arcing.

The Johnson Controls P100AP-2 100 amp, high-voltage circuit breaker is used in automotive and light-duty truck applications, specifically for use with electric vehicle charging stations. It is rated to trip at 60 amps cuts out and open at 35 amps.

The P100AH-2 is a spring-loaded cutout switch designed to protect air conditioners, heat pumps, fan coils, and refrigeration systems that are in continuous service. Designed to provide circuit protection with high breaking capacity, the thermal-magnetic circuit breaker senses overloads in the primary current through the electromagnet.

The P100AP-2 16-Point Programmable Controller can be paired with a wide selection of Johnson Controls Series W Series Energy Management Systems. Features a next generation 16-point Energy Management Module for installation in a confined area and accommodates 2 or 4 heating or cooling stages. The combination of single and 4 stage operation allows you to set staging based on local climate or other applications such as baseboard water heating. These controllers will work with an existing BACnet system utilizing BACnet messaging. This controller may also be paired with the HIC500 series control systems, which share the same format and interface.