Johnson Controls P100CA-2 , Inc. P100CA2 HI-LIMIT # SW,CO 425#,CI 325#

"HI-LIMIT # SW

The HI-LIMIT # SW,CO 425#,CI 325# is a high limit transformer ranging up to 425A (2000V) AC Primary Insulation Level with 325A (1500V) AC Secondary Insulation Level. The HILI # features an integral internal overload protection with internal device fuse and the excellent functional performance of components.

The Johnson Controls P100CA-2, Inc. P100CA2 HI-LIMIT # SW,CO 425#,CI 325# which features aluminum/magnesium alloy body construction with cast-in mounting holes for increased durability and has a three piece polyurethane coated top to provide excellent operator access and includes five unique set point functions - swing limits, offset limits , reset limits, hi-limit and auto-reset functions with the resistance range of 0.5 - 100 psi.

Our seatbelt with HI-LIMIT technology is engineered for excellence, and goes the extra mile to protect your employees and your company. These belts exceed current federal standards by 5 times, and maintain more than 87% of their original tension after 2 million flexes, far longer than most standard seatbelts. With a manufacturing rating of 2,200# and a rating of 325# on the webbing itself, these belts are built for superior strength.

The Hi-Limit control is designed for commercial applications where an oversized limit type control is required.

The Johnson Controls P100CA 2 is the portable, lighted, high-limit , electric arc welding power source that lets you concentrate on your job - without tripping over cords. The P100CA 2 features an adjustable handle and a wrist strap for comfortable operation. The four position foot pedal switch controls all functions of the unit (ON/OFF, ROTATE, ARC & GROUND).

The pneumatic Johnson Controls P100CA-2 is ideal for light duty overhead crane applications. The hand-held low cycle limit switch is housed in an impact resistant polycarbonate case with external circuit breaker. The panel mount AC-3 "hi-limit" option can be added to the AC-2 version for extra protection.

This switch is an electromechanical interlock for high-pressure camshaft injection lines. It employs standard solenoid valve, cutoff relay timing, manual push buttons, contactors or motor starters, Cam-operated switches are used on 4-, 6-, and 8-cylinder engines in conjunction with the chart recorder to regulate camshaft timing under test conditions. This type of switch is calibrated to cut off fuel if the engine speed goes beyond the predetermined rpm range during test operation.

This Johnson Controls, Inc. fire alarm control panel runs on two 120v 20 amp power sources, providing secondary or standby power in case of emergencies or power outages. The control panel is sound rated for commercial use - ideal for high traffic areas with ambient noise levels up to 80dBA. The unit is compatible with the Pro-Link wireless fire alarm control panel network.

Special Features:

The most advanced compressor in the market today with a built-in power failure memory feature.

This Johnson Controls P100CA-2 Inc. P100CA2 is a part of our Commercial Series product line for the Schlosser Corp. This Johnson Controls P100CA-2 is available today with an estimated ship date of 7/15/2017

With the unique CO-CI proportional blending ability of PID control, Johnson Controls P100CA2 is able to modulate gas and oil in response to heat input, effectively maintaining proper combustion management under any load. The result is increased energy efficiency, increased burner life and decreased emission levels.