Johnson Controls P20EB-1 NEW AIR CONDITIONING LIMIT CONTROL D469358

7/150# SPDT AIR COND.LIMIT SW.

P20EB-1 NEW AIR CONDITIONING LIMIT CONTROL . This is a brand new aftermarket replacement 7/150# SPDT AIR COND.LIMIT SWITCH.

This D469358 is a 7/150# SPDT AIR COND. LIMIT SWITCH, AMERICAN HARDWARE MANUFACTURING CO.,INC. PART NO: P20EB-1

When should the air conditioning be on and when should it be off? When you need to control your air conditioning cycles, limit controls are a smart choice, and Johnson Controls offers a variety of options. The Johnson Controls P20EB-1 NEW AIR CONDITIONING LIMIT CONTROL is a 7/150# SPDT ON-OFF AIR CONDITIONING LIMIT SWITCH, designed to switch heaters and conditioners. Since it is a limit control, it will provide two-stage control for your heating and cooling systems. This makes it an ideal choice for many different applications, including home HVAC systems

The D469358 Limit Switch is used to control the operation of HVAC equipment or other loads. The 7/150# SPDT Limit Switch uses 2 wire leads. The SPDT setting allows the switch to be used in 3 ways, Up/On/Off, Down/Off/On, Up/Off/On. The contacts are normally open when the actuator is in the down position. When the actuator is moved to the up position, the contact will close. When used with an HVAC load device, it will maintain full cooling while energized.

The Johnson Controls P20EB air conditioning limit control is the replacement for the Honeywell Type V. This LIMIT SWITCH is made of brass and has a rating of 150# at 7°F. It has two spade terminals and a normally closed contact. It has a 0° to 180° adjustable lever arm with round knob adjustment, insulating block and washer, and mounting bracket. The shaft is straight, it has a finger adjustable dial pointer, a white plug in design, mounting nut and a red differential cover.

The D469358 Limit Control is designed to protect building air conditioning equipment from being damaged by excessive, unintended compressor overrun. The limit controls adjustment knobs provide a means for quick and easy adjustments to set points.

This limit control is used in air conditioning units for continuous on-off control of fans or auxiliary units. It is designed for general use on electronically controlled units only.

When you're looking for all the conventional limit control features, look no further than this product here. There are lots of brands of Limit Switches out there that claim to do everything, but at our limit switch mines, we will never under any circumstances put our name on something unless it truly does everything! This new unit extrudes stainless steel contacts down the loading shaft of the limit switch. This prevents any sort of corrosion or oxidation buildup on the contacts which is common of other unit extrudes stainless steel contacts down the loading shaft of the limit switch. This prevents any sort of corrosion or oxidation buildup on the contacts which is common

Our D469358 limit control device, P/N S905C196-01A is used to heat or cool residential or commercial air conditioning systems. It can also be used to limit cooling during extremely high ambient temperatures. The Limit control functions as follows: The motor will run continuously until the velocity drops indicates drafts are present, then stop until draft levels lower indicating the outside air is again moving through the equipment.

Keep your home's cooling system operating at peak performance with the Johnson Controls P20EB-1 Limit Control. This unit has been tested and meets the latest UL Standard 180A. It operates a heat pump or a gas or a heat-only A/C unit. This Johnson Controls handheld speed control that mounts on a slide rail assembly is an easy way to fix a problem in your home's HVAC system.

The Johnson Controls P20EB-1 NEW Limit Control used in heating and cooling systems in place of a heating thermostat to limit system operation in response to high and/ or low temperatures. It is also referred to as a two stage heater control valve. The control responds only when the switch is set in an ON position, and will not respond when in OFF position. The control consists of a constant current relay which energizes its attached terminal board when the associated switch is in an ON position, and de-energizes when in OFF position.

The control is used in an Air Conditioning, Commercial Refrigeration system to limit the amount of time that the compressor will run.