Johnson Controls P499ACP-101 0-100# PressureTransducer

0-100# PressureTransducer

The Johnson Controls 0-100# PressureTransducer is a high accuracy device that is able to convert high pressure signals to low pressure analog or 4-20 mA current loops. It also includes a PID(Proportional-Integral-Derivative) outputs and its mechanism can be used in both wet and dry applications.

The Johnson Controls P499ACP-101 0-100# PressureTransducer provides accurate measurement of pressures ranging from 0-100 psi.

The Johnson Controls P499ACP-101 0-100# PressureTransducer allow for the automated control of condensers, evaporators, booster coils, air handlers, and other mechanical equipment. This 1000FR 355 VAC Pressure Transducer is constructed with a maximum connection pressure of 30 PSI (2.1 bar). The need for an RTD is common in processes where one controlled variable is proportional to another. This instrument gives you the precision to create the right balance of heat and cooling for your specific application.

The Johnson Controls P499ACP-101 Pressure Transducer is an easy-to-install, single output transducer that can indicate pressures ranging from 0 to 100MPa. The 0-100# PressureTransducer will have no effect on the performance of the equipment with which it is used, and will be able to accurately monitor pressure without interfering with its primary purpose.

The 0-100# Pressure Transducer is built with heavy-duty polyurethane construction, has 100 Ohm resistance, and an IP67 environmental rating. The Pressure Transducer comes in black.

The Johnson Controls 0-100# Pressure Transducer is a transducer for use with systems that measure pressure. The transducer converts the pressure to an electrical signal which can be read by the controller. The pressure ranges are 0-100#, 0-0.5#, 0-1.5#, 0-500mbar, 0-1500psig, or vacuum ranges of 25-3000cmHg or 25-150mmmHg.

The R-Tron P-Series PressureTransducer is a high accuracy, low static pressure differential, differential pressure transmitter. It's designed to measure static pressures from 0-100 PSI and process signals from standard 4-20mA transmitters.

The P499ACP-101 Pressure Transducer provides accurate pressure measurement for water, oil, natural gas, air, and other applications. It monitors pressure to help avoid delivery problems and product contamination in high-pressure systems. The pressure range is adjustable from 0 to 100# (100 PSI / 7 bar). The manufactured materials are resistant to corrosion, erosion, chemicals, shock and vibration. The professional grade sensor offers 1000-hour accuracy at 25C (77F). The LCD display features an easy-to-read number dial with backlight illumination. Calibration re-setting capability is standard on the unit.

The Johnson Controls pressure transducer measures and indicate in psi or kPa. It has a range from 0-100 psig and 0-7 bar. It requires a power supply of 12Vdc with a maximum current of 30mA. The output is a voltage signal that ranges from 0 to 10 Vdc depending on the pressure and temperature of the operating environment, and transmits over RS232C, 4-20mA or HART.

Our pressure transducers are compliant to IEC standard 60051-0 and test as per UL Recognized component test standard for calibrating production line equipment, service or advanced lab. The low cost, flexibility and wide-range selection make these devices the optimal choice for the widest range of applications.

This pressure transducer converts a physical pressure to a proportional electrical output. Pressure to voltage conversion is useful in many systems including boosting, dash displays, and sensor/actuator interface circuits.

The KP-799 is an integrated electronic pressure transducer for consumer and commercial refrigeration and air conditioning equipment. The module provides a fully-assembled and calibrated sensor and circuit board in a small (0.52in x 0.75in) package with integral quick disconnect wiring terminals.