Johnson Controls P70CA-1 C All-Range Control for Non-Corrosive Refrigerants, Single-Pole, Single-Throw, Open High, 100 psi Maximum Working Pressure, 36" Capillary, 1/4" Flare Nut

"20""/100# OPEN-HI

This authentic Johnson Controls P70CA-1 C All-Range Control for Non-Corrosive Refrigerants, Single-Pole, Single-Throw, Open High, 100 psi Maximum Working Pressure, 36" Capillary, 1/4" Flare Nut is one of many available through Office Depot. Order this product today for fast and reliable shipping.

Conveniently turns on/off any size system for simple, reliable operation.

Features Operator-permanent with override hardware if needed, Easy installation with minimum effort, Single-pole, single-throw mechanical operation, Complete with junction box cover, 2 control valves (one inlet check valve and one outlet check valve), 2 power relays (one inlet power relay and one outlet power relay), Transformer is not included.

The P70CA series All-Range Control can be used as a non-corrosive refrigerant pressure-reducing valve, master control, and master cut-off switch. Its patented vertical mounting makes it reliable and easy to install. Features: 1"" Swiveling bonnet cap, Vertical mounting option for exhausting port, Diaphragm assembly is held in place with screws for high reliability and long life, and Quick disassembly without tools for ease of maintenance and service

This C-Range thermostatic control with durable, plated steel enclosure is designed for use on noncorrosive refrigerants. Temperature range is -40°F to +180°F (-40°C to +82°C). The control has a maximum working pressure of 100 psi (7 bar) and a matching capillary length of 36" (914 mm).

With the Johnson Controls P70CA-1 C All-Range Control, a single pneumatic controller will smoothly open and close a valve for a wide range of refrigerants in both gaseous and liquid states.

The Johnson Controls P70CA-1 C All-Range Control is a direct replacement for the "C" temperature control. Designed for use with non-corrosive refrigerants, it has an IP66 weatherproof rating and is rated up to 100 pounds per square inch pressure. It also comes with a two year warranty.

The P70CA-1 C provides the user with a single-pole/single-throw control for on/off operation. The control input can be equipped with either an LRA or Non-Pressure Differential (NPD) bronze pocket transmitter output.

Johnson Controls P70CA-1 C All-Range Control is ideal for two applications where no outside air disconnect is available. All-Range Control is used with applications that require flanged connections at both the suction and discharge sides of the coil. This control has an adjustable pressure set point, full voltage to the coil, 0 to 100% power airflow modulation, and a trip unit to perform all but two functions of a standard 2" NPT drainage/venting type float control - flow limitation and lockout against winding short-cycle.

The P70CA-1 C operates on non-corrosive refrigerants, such as carbon dioxide and ammonia. The "C" indicates a straight-through capillary tube design. The general purpose design of these valves provides flexibility in the application of process and air conditioning control. This series is designed for use by schools, office buildings and factories and other non-refrigeration applications. For use on non-corrosive gases, including carbon dioxide or methane with liquid or liquid materials in an air stream.

The Johnson Controls Fan Guard can help control airflow to applications, especially for low-volume, low-pressure applications. The controller has the capability to switch to ON/OFF/ON/OFF (Quiet ON Feature) operation for low pressure operation. The Fan Guard Controller is CSA Certified and UL Recognized to CSA Standard C22.2 No. 120, UL Standard UL 508 Listed, Rater Dielectric & Surge Voltage Tested at 2200 VAC.

The Johnson Controls P70CA-1 C controls are for use on refrigerators, freezers, air conditioners, and similar equipment in noncorrosive service. The coils are designed for operation at full temperature rise or temperature drop with no external heat trace.