Johnson Controls P70CA-400 , Inc. P70CA400 200/610# 36"CAP SPST OPEN-HIGH

"200/610# 36""CAP SPST OPEN-HIGH"

The Johnson Controls P70CA400 200/610# 36""CAP SPST OPEN-HIGH that we offer is a direct replacement for the following old product codes: Johnson Controls Industrial Division P70CA400 , Johnson Controls, Inc. JCI/IP69K P70CA400 200/610# 36""CAP SPST OPEN-HIGH

The Johnson Controls P70CA-400 - 200/610# 36"CAP SPST OPEN-HIGH is a 200/610# 36""CAP SPST OPEN-HIGH that provides protection for your home at all times. With top suppliers, the Johnson Controls P70CA-400 - 200/610# 36"CAP SPST OPEN-HIGH makes sure you get less engine problems and even fewer vibrations. The Johnson Controls P70CA-400 - 200/610# 36"CAP SPSCNDSLOW OPEN-HIGH is made out of aluminum, so it is lighter than most heavy duty

The Johnson Controls P70CA-400 is a 200/610# 36""CAP SPST OPEN-HIGH.

The Johnson Controls P70CA-400 , Inc. P70CAC400 200/610# 36"CAP SPST OPEN-HIGH is an excellent product that is sure to last through all of your light construction projects. This product allows for on or off-delay timers with delays up to 24 hours, has a 400 foot capillary, and has a 2 inch relay output power. This product is compatible with 110V-60Hz applications.

The P70CA400 is a 200/610# 36"CAP SPST OPEN-HIGH. Designed by Johnson Controls, it is a Physical Device.

The Johnson Controls P70CA-400 is a 200/610# 36"Cap SPST Open-High used to control and monitor applications where there is a constant demand for flow and process pressure. With its built-in back flow check and no bypass, this relief valve works as a pre-charged and pre-tested assembly. It has a maximum flow capacity of 9.2 GPM at 185 PSI and gives an outlet pressure rated at 200/610#.

The Johnson Controls P70CA-400 pressure control, which is supplied by CE Power. It meets the requirement of UL and CSA and its rated load current is 200/610 A. This model has a mounting bolt...

The Johnson Controls P70CA-400, Inc. is a 0.65lb Capacitor rated to 200/600Vdc working voltage, the capacitance value is 400µF. The leads are rated to 600Vdc with a wire size of 14AWG—19AWG wire size.

The Heavy Duty Series P-70 is designed for high cycle industrial applications of all kinds, with the source of interruption control. These devices are typically used where control over amperes (current) is required, preventing accumulations of static charge. Available products in the Heavy Duty Series include: circuit breaker trip-only type products, contactors, motor contactors and coil contactors."

The 36" WMR Capable Controller is designed to control a 5-ton motor. This controller has a manual reset motor overload protector, and will operate over a 36 VDC input voltage range. The controller incorporates an integral 3-1/2 digit, 10 mm high LED readout, and will fit in a DIN-rail mount box. Typical applications include motors used for fan applications, machinery control, pump control, food processing equipment control, medical equipment control, ventilation blowers and many other general purpose motors.

The Johnson Controls P70CA-400 is a 200 amp, 480 volt, single phase circuit breaker with an interrupting rating of 600 amperes at 0.72/0.3 ohms. The P70CA-400 also has a current trip range of 20 to 160 amperes at 120/240 VAC, and has under-voltage and over-voltage protection.

The Johnson Controls P70CA-400 series commercial duty thermostat is a high performance building automation system enclosed in a dependable metal housing. The Johnson Controls P70CA-400 series commercial duty thermostat has an elegant circular display and the ruggedness to handle any environment. It is designed for both indoor and outdoor applications and offers a 5 year warranty.