Johnson Controls PLT333-1R VERTICAL FACEPLATE FOR T26 W43 & W45

VERT. FACEPLATE FOR T26 W/CVR

A new style vertical faceplate for the T26 W/cvr. It comes with a one-piece snap on/off lens, which makes changing out lamps a breeze, and also allows the end user to easily tap into the ballast power for a lamp dimming circuit

The Vertical Faceplate for T26 W43 & W45 is designed to work with any of the earlier versions of T26 panels, W43 & W45 control enclosure, and the HVAC housings. It is designed to be mounted vertically to a side wall of an enclosure or HVAC housing.

This Vertical Faceplate allows you to convert your T26 control cabinet, type W43 or W45, to a stand-alone unit. The faceplate is equivalent to the faceplate provided in the standard equipment kit.

The PLT333-1R is a vertical faceplate for use with the T26 controls wired in series. The unit has an easy to read, illuminated, pushbutton interface. The design allows the panel faceplate to easily be mounted vertically or horizontally on a wall or panel. The faceplate has a 10 amp circuit breaker visible on the front of the plate to aid in circuit protection.

The Johnson Controls PLT333-1R is a Vertical Cover Faceplate for use with the following Products: T26 or T26W Compact Fluorescent Light Option for 47 to 57 Inch Wide By 36 to 48 Inch High Trim; T36W, T36CW Compact Fluorescent Light Option for 60 Inch Wide By 36 Inclu

The Johnson Controls T26 Vertical Faceplate converts a standard T26 thermostat from horizontal to vertical operation. It is easy to install and has a flame-retardant thermoplastic enclosure.

The PLT333-1R is a vertical faceplate with 1 relays. It is used with T26 wall mount control stations and W43 and W45 wireless keypads. This device comes in chrome finish and has a function to control the heat/cool operation of domestic HVAC equipment, ventilating equipment, refrigeration, irrigation, lighting, garage doors, status indicators, alarms, low water protection, or other accessory devices that do not require programming or messaged communication.

This is a replacement faceplate for the Johnson T26 and W43 and W45 enclosures.

The Johnson Controls PLT333-1R vertical faceplate is designed to be secured to the building wall or other surface. This device is meant to safely contain energy using fusible link protection. When fused, the energy will be released in a flash, which picks up the voltage through the breaker causing it to essentially melt down. The faceplate measures 40 inches long by 6-1/4 inches deep by 3-5/16 inches high. This faceplate has a minimum circuit breaker voltage of 2300 VA and a maximum system voltage of 139.2kV.

The PLT333-1R is a vertical CW/CW trimmer faceplate with touch point. It is designed to trim light commercial window trims and comes packaged with the transformer. The door stop feature helps align the panel against the stop if it is slightly non-flush against the wall. You can now install rectangular windows with no secondary trim work required.

The Johnson Controls T26 Series Thermostat is ideal for HVAC applications where single stage temperature control is required. This thermostat provides built-in room sensing along with simple ON/OFF operation. The T26 Series thermostats have a solid state control that eliminates the need to change battery periodically.

The C26 is a whole building, two-wire integrated fire alarm control panel (IFC) designed for use in applications requiring an easy-to-use, general purpose system. The CB26 is a companion board designed to expand the capabilities of the C26 when used with one common power supply and when the need for additional hardwired logic is required.