Johnson Controls T-4000-114 LABEL SET POINT INDENT.

SET POINT LABEL CARD

These label set point card are used mostly in the Point Point programmable thermostat. Point Point is an economical way to control your home or business heating and cooling system. Point Point also offers 24-hour start.

The Label Card is a replacement label card for the Johnson Controls T-4000 Series Temperature Controllers. This helps ensure that you have a clean, full set of labels when the others become damaged or worn out.

The T-4000 point label set is an ideal accessory for any of Johnson Controls' transmitter & receiver units. The label set features cards with the following information: High temp warning message, cold start settings, cold load shunt settings, shunt thermistor setting, pressure/temperature settings and valve status labels. This card set also includes a blank card for your specific labeling requirements.

Not for use on Frigidaire models using a separate controller. Label Card is used with T-4000 liquid-filled temperature differential controllers, excluding TT1746E which has a display tell-tale, T4050EF and T4050EM liquid filled temperature differential controllers. Tell-Tale is a liquid filled temperature differential controller that provides a single control loop of temperature indication for heating and cooling coils, liquid manifolds, plenums, air pre-conditioners and other temperature sensitive coils.

Label card that includes sensors for panel riser temperature, supply room temperature, supply chilled water temperature, supply flammable gas temperature, supply ozonated water temperature, supply hot water temperature, supply steam temperature.

When you get out of the shower, get dressed and go about your day, the Label Indenter saves you from having to constantly check that the water is at the right temperature. The adjustable thermostat allows you to precisely set and maintain a desired water temperature up to 135°F (57°C). A change in the water temperature is indicated by a flashing red LED and an audible buzzer.

Engraved with the recommended setting for two-temperature control systems. Indent design makes it easy to find and removes for easy installation.

Every T-4000 series progressive cavity pump has a label which indicates the name of the pump, motor size, belt size and duty cycle. The labels are located on the front of the pump.

The thermostat controller (also known as a T-2000) is a programmable, digital temperature regulator for kiosks and small volume heating/cooling applications. The thermostat is easy to set and operate with a push-button display for switching between heating and cooling modes. With this Controller, there is no need to manually turn the temperature up and down! Temperature settings for heating and cooling are automatically controlled by an internal microcomputer that calculates temperature and adjusts fan speeds. The thermostat can be set to Fahrenheit or Celsius temperature readouts depending on the Model selected.

The Johnson Controls T-4000 system is a direct replacement for the following controls: Carrier models C0484T050A / C0524 / C0664 / C0760, Bryant models B0482T020A / B0529T030A, Payne model PCD50240A, Trane model TT050802A.

The Labelspoint® materials marking system is a robust and reliable method of indicating and delivering critical information. This system produces permanent labels that meet national and international standards for marking hazardous and non-hazardous materials.

The Johnson Controls T-4000 Series, commonly known as T-Stat, is a programmable thermostat that provides both heating and cooling control. This product is manufactured in the USA and it also has a 14 year warranty.