Johnson Controls T-5800-3 Pneumatic Controller, Dual Input

DualInputRecvrCntrlr Proportnl

The TT5800-3 is a dual input receiver controller designed to control pneumatic cylinders located NEMA rated 0.5hp to 10hp. This model uses two separate wires for input, where one wire is used to power the receiver, and the other is used to power the cylinder.

The Johnson Controls DualInput Controller is designed to work with many 2-stage, 3-stage and modulating processes. The dual input controller includes one common control valve with two separate pilot lines, which allows for increased control sensitivity for increased control, or redundancy control in applications where spurts of steam may occur due to unbalanced pressure.

The T-5800-3 Dual Input Controller is a proportional controller with separate, independent air and nitrogen flow control. This model is a two position controller with a range of 200 to 800 psi and input range of 5 to 15 psi.

The Johnson Controls T-5800-3 dual input pneumatic controller provides two proportional inputs plus a stand alone output. The controller is designed to work with an existing pneumatic stile door and slide gate operator system.

This pneumatic controller provides proportional control of two air circuits, enabling you to adjust the proportion of air flow between the two circuits. Ideal for manually operated valves or automated equipment. This dual input controller is equipped with level translators, offering the ability to compare levels on each input.

Save energy and money with Johnson Controls T-5800-3 Dual Input Pneumatic Controller. This controller can be used in conjunction with a secondary control device to send control signals, increasing your system's overall efficiency. An adjustable clamp allows for easy mounting, and an integrated carry handle makes transportation a breeze. Johnson Controls delivers smart building solutions from room sensors to building automation systems.

This Johnson Controls T-5800-3 Dual Input Pneumatic Controller is an OEM (Original Equipment Manufacturer) replacement for pneumatic controllers of the same model, which rely on user-settable, non-adjustable input pressure settings of 160/200/250/320/400 psi. The adjustable input range of the Johnson Controls T-5800-3 pneumatic controller allows users to set it for a specific pressure range, running from 150 to 550 psi. The unit includes a handy QuickStart guide that answers many typical questions and walks users through many common pneumatic control applications. This controller features

T-5800-3 Pneumatic Controller, Dual Input

The Dual-Input Controller is used to control heating, ventilating, bleeding, and air conditioning (HVAC) systems by supplying or redirecting low compressed air for installations commonly found in food service, recreational vehicles, commercial buildings, and HVAC retrofit applications.

The T5800 Series pneumatic controller is a compact, versatile instrument that performs as a proportional and on/off controller and normally closed relay. It can be used to monitor and control pressures, temperatures and set points with high accuracy. The T5800 Series also monitors the status of two separate sensing circuits and performs as a dual function controller.

Water or Environ-mental Controls \/