Johnson Controls T-5800-600 2 CONNECTOR PINS(INPUT & OUTPUT)

2 CONNECTOR PINS(INPUT&OUTPUT)

Attach the Johnson Controls T-5800-600 2 CONNECTOR PINS(INPUT&OUTPUT) to your A/C unit. Two pins are included in the package of the Johnson Controls T-5800-600 2 CONNECTOR PINS(INPUT&OUTPUT).

Johnson Controls T-5800-600 2 Connector pins(input&output). These pin and sleeves come together with a plastic cover and connector. These parts are used for inserting and pulling out the pins in an automobile electrical system. We supply this part to various dealers of automobiles, automobile spare parts manufacturers and parts manufacturers of automobile spare parts.

The T-5800-600 2 Connector Pins (Input & Output) is used for the following products: - The XL1200i Super Hybrid-i Smart Thermostat - The T8160 Commercial XL10 Color Touch Screen Programmable Thermostat - The T8075 High Performance Programmable Building Thermostat

These 2 connector pins come with a white plastic housing and pins facing both up and down. The pins can be removed from the plastic housing for insertion into standard wiring.

Plug into the future with Johnson Controls' T5800-600 2 connector pins. You can control your home's temperature from anywhere with this pair of previously hard-to-find parts.

The Johnson Controls Connector pins are a 2 pin connector with input and output which makes this a multi-wire system. The wire is 36" long and can withstand at least 3 amps of current.

For applications where air flow cannot be interrupted or reversed, the 2 connector pins can be applied. The red pin is used if it is necessary to interrupt the air flow. The green pin may be used for an application where there is no risk of the air flow being reversed.

Two pins, one input and one output, to control an AC appliance from a DC power supply. May also be used for testing the continuity of a switch or circuit. Low contact resistance for excellent electrical power transfer

Connects input connector (A) of main control board (1) with output connector (B) of heating element (3), to complete the ground circuit.

Used for 120V maximum load.

This accessory connector is used with Johnson Controls' Sentry and Contactor products. This connector permits the facility to disconnect battery charging when AC power is available, thereby avoiding large battery self-discharge when AC power is temporarily lost.