Johnson Controls TE-6310F-1 Temperature Sensor, Nickel 1k ohm, Flush Mount

WALL SENSOR

Wall Sensor

This precision wall sensor installs in a standard electrical box to monitor room temperature with ±1.8° accuracy for making comfort adjustments and controlling greenhouse heating systems. The nickel alloy, 1k ohm resistance sensing element provides high sensitivity and quick response.

The TE6310F/1 Nickel 1k ohm wall sensor delivers accurate temperature measurement through use of a polarized PTC thermistor. Communicating with the building management system interface via two-wire RS-485 data transmitter, the Johnson Controls Wall Sensor is an example of precision engineering for reliable temperature sensing, making it an ideal solution for powering systems that have high reliability or safety concerns.

The TE-6310F slotted surface probe is a flush-mounted wall sensor with a normal response time of 0.65 seconds and a sensing range from 0°F to 140°F (-18°C to 60°C). It mounts easily to ceilings, walls, or other flat surfaces using the included hardware. Specifications Output Type: NPN Sensing Range: 0°F to 140°F (-18°C to 60°C) Response Time: 0.75 seconds

The TE6310 & nickel 10000 ohm wall sensor is designed for use with the Johnson Controls TE-61 series temperature controllers.

The Johnson Controls TE-6310F-1 Nickel 1k ohm Temperature Sensor matches the design and color of the controls in building automation systems for seamless integration. This temperature sensor has a cable length of 4 feet and a temperature range of -22° to 160° Fahrenheit. It is suitable for flush mount applications and is also known as a wall sensor or room sensor.

This sensor provides a continuous temperature readout for your heating and cooling equipment. This sensor comes with a white epoxy coated stainless steel housing and a nickel resistor. Price includes FREE ground shipping within the USA.

The TE-6310F-1 is a flush mount, 1k ohm nickel sensor designed for Johnson Controls' Heat and Argon gas fired heating appliances with metal or plastic flue sections. The TE-6310F-1 may also be used to sense room temperature in areas that are free of drafts caused by high velocity air movement, or are well insulated. The TE-6310F-1 is protected without the need for an additional heat shield by Johnson Controls' patented "thermal wrap." This unique feature provides protection for the sensing element while allowing the sensor to be mounted close to combustible materials.

The Johnson Controls TE-6310F-1 temperature sensor is constructed with nickel-plated brass for long lasting durability. A temperature range of 0 F to 400 F is displayed on the 0.5 in. (12 mm) high LCD display that feature high contrast backlight illumination. The sensor can be installed in either a vertical or horizontal (flush mounting versions only) position and can connect to up to 6 master units, allowing multiple units to be applicable to the same control panel simultan eously

Johnson Controls TE-6310F-1 Temperature Sensor, Nickel 1k ohm, Flush Mount (for fuel oil heaters)

This Nickel Thermistor is a 1,000 ohm Thermistor used for Semi-Crystalline Silicon PV. It is Flush Mounted and a replacement for a TE-6310F1.