Johnson Controls TE-6360F-1 - - Temp Sensor, Thermistor 10k ohm Type 2

Temperature Sensor

The Johnson Controls TE-6360F-1 temperature sensor is a 10 kO NTC thermistor packaged in stainless steel with an axial lead wire. The thermistor is designed to be used as a temperature sensor in heating, ventilation and air conditioning equipment. In cooling applications, the device acts as a temperature or thermal limit switch.

Johnson Controls TE-6360F-1 - - Temp Sensor, Thermistor 10k ohm Type 2 50 PPM/10C Accuracy -40 to 85 deg C, Clipped leads

Johnson Controls TE-6360F-1 - - Temp Sensor, Thermistor 10k ohm Type 2. Johnson Controls Temperature Sensor The Johnson Controls Temp Sensor is used on a variety of HVAC systems and building automation applications. It offers a 9 foot cable attached to a 10K ohm thermistor that measures temperature with an accuracy to better than +/- 1 °F (0.5 °C). These sensors are used in steam traps, fan coils, and air handling equipment.

- This Temperature Sensor is used for heating and air conditioning systems, to measure the temperature of air stream.

Sensor, Thermistor 10k ohm Type 2, FEP Tube, Braid Shielded

Johnson Controls TE-6360F-1 - - Temp Sensor, Thermistor 10k ohm Type 2. This sensor is commonly used in HVAC systems to measure the temperature of air being blown from a cooling coil.

The TE-6360F-1 is a 10k thermistor that is used to sense temperatures from -40°C to 120°C. The thermistor has a resistance of 10k ohms at 0°C and 2.5k ohms at 100°C.

The Johnson Controls TE-6360F-1 - - Temp Sensor, Thermistor 10k ohm Type 2 is a temperature sensor that allows you to monitor the temperature in your home or workplace. It features a Type K thermocouple probe and 10K ohm resistance. This sensor can be used over extended periods of time without affecting the accuracy of its reading, so it can be left inside your home or workplace to continuously monitor the temperature.

The TE-6360F-1 is a miniature thermistor temperature sensor with a nominal resistance of 10 kOhm and a voltage output characteristic which varies linearly with the Kelvin temperature coefficient of the thermistor material. It provides accurate measurement of junction and case temperatures in applications where low power consumption is critical.

10K Thermistor, JOHNSON CONTROLS TE-6360F-1. Thermistor Type: 10K ohm NTC, Package Series: TE, Temperature Range (C): -40 to 85 degrees C; Resistance at 25 deg C/ 77 deg F: 10k ohms ± 5%.