Johnson Controls TE-68NP-0N00S Temperature Sensor, Nickel 1k ohm with Phone Jack

1Kohm Nickel Sen W/Mod Jack

A nickel resistance thermistor with Mod Jack. The Thermistor is rated at 1k ohm +/-50 ppm/°F. The thermistor has a truly flat response curve over the -200° to 700°F range when ambient temperature does not exceed 100°F.

This temperature sensor, nickel 1k ohm with phone jack, is constructed of a copper nickel alloy. It's rated for use in a -20 to 300 degree Celsius range and at 10 to 85 percent ambient humidity.

This is a specialized thermostat with a Mod Jack output. This sensor can be used for Central H/A thermostat to interface w/ climate control systems & 12V automobile climate control systems.

The TE-68NP-0N00S is a Nickel Temperature Sensor with 1 kOhms of resistance, and a P/N jack.

This is a Nickel Temperature Sensor with 1k ohm resistance. It has a Phone Jack, which allows you to connect the wire to the temperature probe of any digital temperature controller. This nickel sensor also works great paired with an On/Off switch or magnetic contactor for your heating and cooling system.

The Te-68NP-0N00S temperature sensor has a metal sheath and nickel 1k ohm resistor and comes with a molex jack. The temperature will not stabalize unless the temperature probe is immersed in metal or mineral oil. Typical immersion indication range is -50 to 250C (-65 to 482F).

The TE-68NP-0N00S is a 1 kW Nickel Sensor with 5 meter (16 ft) cable and phone jack connection. This sensor provides a solution for direct connection to all Johnson Controls MasterTherm® devices.

The TE68NP, is a nickel-plated bimetal sensor with screw on 1/8" phone jack.

Phone jack Temperature sensor can be mounted anywhere with a standard 4 pin phone jack. Temperature display selectable in Celsius or Fahrenheit with ±1° accuracy. Sensor provides 2 wire 2-10volts DC excitation for PT100 Pt-100 RTD sensing ts S/N etched on body.

The JCI-TE68NP-0N00S temperature sensor is a low cost, rugged component designed to allow processors to control thermal applications with a defined temperature set point. Sensors may be procured for a variety of applications including heating, air conditioning and fire protection systems, warming cabinets and environmental test equipment. The JCI-TE68NP-0N00S temperature sensor is a programmable device which can provide up to 16 bits of resolution in defining the temperature output value.