Johnson Controls V-2410-2 Solenoid Air Valve, 3-Way, 120VAC, 0-25 psi

"120V E-P VALVE

The V-2410-2 Solenoid is a 3-way, normally open e-p valve. It has a solenoid coil that provides mechanical control between the pilot signal and the poppet. It is a voltage sensitive, normally closed e-p valve that, when energized, opens the poppet to provide pilot air to the pilot assembly. Open conditions can be used as a feedback signal from another device. Examples include temperature control of an electric heater or as a control signal from a remote sensor for hydraulic pressure switch operation.

The Johnson Controls V-2410-2 Solenoid Air Valve will provide the necessary connections to the heating and cooling system. This e-p valve can be installed in a vertical or horizontal position and has a large dial for precise adjustments. To protect against rust, exposure to air and grime, this valve has a stainless steel conduit cover.

100% NEW! A Solenoid Air Valve (SAV) is a 3-way, 2 solenoid remote pilot valve for modulating and metering compressed air, natural gas or water provided by electric control valves. It can be directly connected to a Solenoid Air Controller (SAC).

The V-2410-2 solenoid air valve is a 24V, 120V AC/DC Three position Normally Open (NO) 3-wire control air valve. The V-2410-2 is controlled by a 120V AC or a 24V DC supply for normally open applications."

One (1) NEW Johnson Controls V-2410-2 Solenoid Air Valve, 3-Way, 120VAC, 0-25 psi 24VDC. 521435-001

This solenoid valve is used to control compressed air and pneumatic signals in applications such as vehicle brakes, forklifts, and agricultural vehicles. The valve can be mounted inverted or upright. It is only operated by an electric current and it does not contain any moving parts."

V3 Solenoid valves are used as a means of controlling various types of air and gas flow devices. These air valves are used on a variety of Air Mover components.

The three-way Solenoid valve can be used as a Lighting/Termination, Makeup Air, or Exhaust, each providing a different level of control for temperature and humidity to help keep the room at a comfortable temperature and relative humidity.

This Johnson Control V-2410-2 solenoid valve, 3-way, 120VAC, 0-25 psi is used with the following product models: Johnson Control-HD36VSPW1 , HD42VSPWK1 , HD42VSPWW1 , HD50VSPWK1 , HD50VSPWW1 – Holds Air, Airtemp System – Tank Only, Heat Pump – Tank Only, Heat Pump – Carrier Top Mount Condenser

This new 24VDC Valves from the V Series have been designed for challenging applications including high speed, high water pressure and high temperature. The V Series Valve from Johnson Controls is extremely reliable and durable while being low cost on energy savings.

The Johnson Controls V-2410-2 Solenoid Air Valve, 3-Way, 120 VAC, 0-25 psi is a solenoid air valve that is a a full range valve capable of delivering airflow from 0 to 25 psi, and 3/8 inch inlet. This specific valve has typically controlled coolant or fluid applications.