Johnson Controls V-3766-1001 - - Pneumatic Flare Valve, 2-Way

"1/2"" N.O. FLARE 3-6# 1.0cv"

We carry a wide variety of 2-way pneumatic valves for use in building & service, HVAC, industrial and OEM applications. Pneumatic Flare Valves are used to exhaust gases up to 150 PSI. These valves are available in both normally open (NO) and normally closed (NC) configurations. The snap ring seat design provides easy replacement of seat & spring which reduces the cost to rebuild or refurbish your valve.

The V-3766-1001 Pneumatic Flare Valve, 2-Way is a fixed orifice with internal check ball that is pneumatically operated. This device can be mounted either vertically or horizontally and has a flow capacity of 1.0Cv (40gpm). It has a maximum pressure of 5 PSI and is appropriate for use with most automotive and hydraulic fluids. This valve meets the requirements of ASTM D2171 and SAE J578 Class B specifications.

V-3766-1001 - - Pneumatic Flare Valve, 2-Way

When your equipment malfunctions, it's frustrating, but when you make a mistake in making a repair, it can be downright dangerous. Make sure your previous repairs are done in the right way every time with this flare valve from Johnson Controls. Whether you need a replacement part or a new component for something you're building from scratch, this high-quality flare valve is exactly what you're looking for. With a durable steel construction and a rugged brass handle, this piece is built to last. Its simple design makes it easy to use, and its heavy duty construction ensures that it will stand up to even the most difficult of hands

The V-3766-1001 is a 2-way, Pneumatic Flare Valve. It connects together two pneumatic lines. This product is made of Stainless Steel.

The Johnson Controls V-3766-1001 Pneumatic Flare Valve, 2-Way can be installed as a replacement or as a new line. In this solution, it comes as a complete kit that includes the pneumatic flare valve and mounting bracket with screws. The part number for this kit is V3766-1001.

The V-3766-1001 is the air source component of the Dual Flare Booster Valve set. The valve is typically used on straight sections of hose between an air supply and booster.

The Pneumatic Flare Valve, 2-Way is a pneumatic flare valve with a design factor of 2. The nominal size is ½ in and the maximum pressure is 6.0 units, with a maximum delivery of 0.9 units in a controlled state. Use a pneumatic flare valve to control air flow in systems that require reducing the flow of gases, such as pneumatically powered valves and equipment on assembly lines.

The Johnson Controls air-operated 2-way pneumatic flare valves are designed to provide a positive shutoff at the end of the operating stroke. The V-3766-1001 is an improved design, incorporating a spring-loaded pilot pressure regulator, positive poppet mechanism, resilient seals and heavy bronze bushings to allow operation up to 500 psi without leakage.

The V-3766-1001 is a two piece pneumatic valve that can be used as a two way for transferring material from a tank car to a rail car. The brass body has a plated steel swivel bore and stem, and it provides fine adjustment of flow with a minimum flow of 1/2 LPM at a maximum pressure rating of 124.4 bar (1940 psi).

This dogbone shaped valve provides positive shutoff in pneumatic applications when used with large bore tubing when responding to start/stop demands.

A hand-held mechanical hand pump for both the inflation and deflation of a variety of pneumatically operated pneumatic equipment.