Johnson Controls V-4332-1007 1/2 MIX 4-8# W/A 1.2CV

"1/2""FLARE

1/2""FLARE MIX 4-8# W/A 1.2CV

This Johnson Controls V-4332-1007 1/2 MIX 4-8# W/A 1.2CV fits 1/2"" flare gas and liquid lines with minimum 0.5"" flare, and has 0.2"" inside diameter with maximum water flow to meet low-temperature extremes. It has a 1/2"" brass screw and stainless steel washer and is made of stainless steel. Its panel is red and aluminum and includes a retainer spring that prevents the flare nut from falling to the ground while removing the flare nut tool. This valve has a thread measurement of 9/16""-

Stainless steel housing, 1/2"" pressure relief valve."

This backflow preventer valve assembly has a straight connection and includes a 1/2"" male flare fitting with 1.2 CV discharge.

Successful below-the-line marketing communications program designed to increase sales for V-4332-1007 1/2 MIX 4-8# W/A 1.2CV

The Johnson Controls V-4332 Series 1/2"" Core Mixing Valve Core with Access Valve is an integral component of the mixing valve. The Core is the portion of the valve having all the seats and ball and spool valves, and through which the pressure and/or temperature medium flows." …

ASE suggested replacement

The V-4332-1007 is a 4/8 GA-1/2 inlet 1.2 CV model HMI valve regulator with a ANSI [National] [ American National Standards Institute [ANSI]] [B521.1] [MSS-SP43] [AWWA C151]. The Johnson Controls VJCV4321007 is NSF [National Sanitation Foundation] 61 certified.

The Johnson Controls V-4332-1007 half-mix water heater has internal access to fuel tank for added safety. Range is 1/2 GPM to 8 GPM with a 1.2 Capacity Voltage. Max BTU is 4,300. Also available in 240V Package, Model # 373300001

Professional plumbers recommend most frozen food items be thawed in the refrigerator overnight. The JCI V-4332 Series Food Waste Disposer is easy to install, has a 1/2" flush mount installation, and features universal mounting capability.

Mixes both hot and cold. We recommend use of the Model 8048P-007 NEMA 1 control when this mixing valve is used with supply pressures above 150psig. Mixing valves are suitable for use in exposed piping systems, even in the absence of a pump.