Johnson Controls V246GC1-001C Water Regulating Valve, 2 Way, 3/4 In

"3/4""npt Hi#WtRegVlv200-400#DA"

Johnson Controls V246GC1-001C Water Regulating Valve, 2 Way, 3/4""npt Hi#WtRegVlv200-400#DA 1 Year Warranty

The Johnson Controls 2 way In-Line Water Regulating Valve comes with a solid brass construction. This valve is used to prevent backflow or surge while allowing utility pressure to pass through during fire suppression situations. The regulator valve has a 2-inch port connection, a 3/4""npt inlet and a 1/2"" npt outlet with a female thread of 4"". It comes with a wall plate and an added 3/8"" npt inlet on the side of the valve body.

The V246GC1-001C is a 3/4" orifice water regulating valve with 2-way, 2 Position control. This product comes in a white plastic body with standard handle and saddle style seat with chrome cover. 200-400 psi pressure drop seat which is nylon disc type. Flow rate up to 60 gpm.

V246GC1-001C is a Two Way or Mid Position Level Regulating Valve that reduces the demand for energy of process water. Designed using the best of Johnson use.

Our water regulating valve is designed to control the flow of water into a high-pressure hot water system for heating buildings with radiators or coils. The plastic body and brass handwheel offer durability, and the fully-sweated nipple allows for easy installation through a tight fitting hole. This valve is CSA certified and comes with a wide range of operating pressures, making it an optimal choice for many applications.

The Johnson Controls 2-way water regulating valve allows for the addition of a flowmeter, pressure gauge, or other device to measure and control water systems. The 2-way valve features a Cv 5, 0.25 to 0.5 which equals a 1" trip point. The maximum allowed system pressure is 400 psi at a temperature range of 100°F to 160°F.

A water regulating valve can be used to limit the flow of hot or cold water to an existing fixture, temperature control manifold or mixing device. This particular model is designed for residential applications and will allow up to 0.3 gpm of flow.

When you're searching for a water regulating valve, you can usually trust Johnson Controls to have the right option. Versatile and dependable, this option from JCI is sure to meet your needs.

A water-regulating valve is used in an application when there is concern that the pressure in the potable water may exceed recommended limits. The primary purpose of the water-regulating valve is to reduce the incoming pressure to a lower value compatible with the requirements of the system.

These Johnson Controls valves are ideal for regulating the flow of water in commercial refrigeration applications. The valves feature a square body design with four-bolt flanges and stainless steel bonnet. They come available in carbon versions that include an inlet port screen and built-in capillary tube for system pressurization. These vacuum-breaker valves are designed to work in systems with negative pressure, and can be used in heating applications. The metal disc construction provides strength against impacts, high operating pressures, high temperatures and other factors, making it an ideal part for your system.

Regulating air and water flow to control irrigation system; Use with low-pressure drip, microsprinkler and other water delivery systems; Designed to fit pipe size 1/2" through 2"; Model V246GC1-001C

Interstate Plumbing Products manufactures products that are sold on the site. The plumbing products are sold for uses both indoors and outdoors.