Johnson Controls V47AC-29 , Inc. V47AC29 3/4" 115/180F 11/16x3.25"

"3/4"" 115/180F 11/16x3.25"""

The Johnson Controls V47AC29 3/4"" 115/180F 11/16x3.25" Heat Pump Limit Switch has a voltage rating of 120/240 V. This switch is ideally used in heating and cooling systems in commercial buildings. The current capacity is 0.50 Amps and the circuit breaker is 15A or 20A. Voltages are 115 VAC and 208-230 VAC at 38 and 50 Hz respectably. The contact types are SPDT normally closed, N.C., and the control functions are cycle, on-off, momentary, and off-on.

The Johnson Controls V47AC-29 is a 115/180F 11/16x3.25" . This part is made of brass and is used in the Defrost applications.

This Johnson Controls V47AC-29 is a 115/180F 11/16inHg 3/4inDia 11/16in. Spring Valve served in copper compression fitting for use in "air conditioning, heating, and domestic refrigeration systems" industry. Approx. Gross Weight: 1.2 lbs., Length: 3 3/8", Max. Working Pressure: 150 PSI, Max. Temp.: 180 Degrees F

Our V47AC-29 ball valve control, manufactured by Johnson Controls™, is a three-way unloader and shut-off valves with pre-set limits designed for fuel line service in natural gas or oil burner applications. It has 11/16" port size, 115/180 F maximum temperature rating and 111° maximum pressure rating. It has a Buna N spool and stem, 316 SS heat zone and 316 SS bonnet with integral screw.

The V47AC29 is a 4-wire control designed for use with both heat and air conditioning in 1 to 5 ton systems. It operates continuously from 115 to 180F and provides proportional heat and constant air volume for every setting. Each of its 3/4""NiCrMo thermocouples and 3/4""honeywell ni-chrome molybdenum thermoelectric coolers are connected in parallel. These extension-mounted controllers are designed for use with 24 V or 48 V heat pump equipped cooling units.

The Johnson Controls V47AC-29 is a 3/4" non-programmable electric valve with a normally closed solenoid coil, stainless steel body and actuator for outdoor applications. It will function between 0.0 and 50.0 PSI, and has a maximum working pressure of 180PSI.

Johnson Controls now offers the V47XX Series of heating and air conditioning units with an optional drain pan for wet-suite applications. These cooling coils have a suction and evacuation design, where the condensate is evacuated by gravity from the bottom of the coil. Drain pans in sizes up to 30" deep are available in schedule 80 PVC or 20 gauge stainless steel. Evacuation pans are offered in 7 standard depths down to 14-1/4" deep with custom depths available upon request. Drain pans feature 3/8'16 threaded couplings for flexible connection to properly sized drain line."