Johnson Controls V47AR-2 PENN 1-1/2 IN MODULATING WATER VALVE 115-180F D538414

"1 1/2"" TEMP.ACT.VLV. 115/180F"

The 3/2 Penn V 47AR-2 Modulating Valve is a direct replacement for the older style PENN 1-1/2" Temp.Act.Vlv. 115/180F that fit the following brands with 1 1/2" posts: Tranter, San-Slim, and Fisher & Paykel.

The V47AR-2 PENN-1 1/2 in. Modulating water Valve 115/180F is a solenoid type water control valve with an adjustable actuator. The valve responds to a 4-20 mA signals from the Control Panel. This unit is for use on commercial, industrial, and light commercial heating and air conditioning systems. This valve comes with 2"" (51 mm) ports and three-hole mounting provisions. It can be used in combination with chilled water coil sensor boards and TSTAT 37 PENN or TSTAT 22 PENN temperature controllers.

This V47AR-2 Penn Tempact™ 1.5"" Modulating water valve 115-180F, D538414 by Johnson Controls is designed for commercial and industrial applications. It comes with a mounting bracket, a quick-disconnect fitting, and a field adjustable handle that bends to fit your required minimum flow. This product can help cut energy usage and costs while providing consistent temperature control for smaller water heating systems.

A Vertex® Series Multifilament, non-coated water-clear PVDF Nylon Tube is utilized to make this diaphragm valve. It has been pressure-tested with a reliability rating of M5 (5000 psig). This Johnson Controls V47AR-2 PENN 1-1/2 IN MODULATING WATER VALVE 115-180F D538414 product is manufactured in China for Johnson Controls.

Designed to comply with performance requirements of the American Recovery & Reinvestment Act, Johnson Controls' V47AR-2 PENN 1-1/2 IN MODULATING WATER VALVE 115-180F is a device that controls the flow of potable water into a drinking water system, irrigation system, or air conditioning system.

Durable PENN® 1-1/2"" Mono Modulating Valve allows flow control of water in hydronic heating systems with the higher flow rates typical of domestic hot water systems. 5600 WATTS, 240 volt, 2 pole contact type, minimum load 5.6 amps (figures given are for max.power demand).

Our lineup of V47 Series valves offers you a reliable solution for controlling water temperature and flow in hydronic heating circuits. All Series 47 valves are designed to reduce flow to prevent freezing, while providing full range sweep from 0% to 100% flow. This control valve features a cast-iron body with a brass bonnet and stem, 1 1/2"" port size, and an actuation mechanism type of modulating. Use this pressure-balanced and water-quality tolerant valve in residential or light commercial hydronic heating systems that require precise temperature control.