"1 1/2"" 2W BALL VALVE 29.2CV"
This Johnson Controls VG1245ER 1-1/2" 2W BALL VAL 29.2CV STAINLESS STEEL TRIM LE is a cutlery and more trusted and utilized brand of Hip Sinks and related products in the world. stainless Steel,With its stand-up pipe fitting, this Ball Valve makes it possible to install ball valves with an upper outlet of less than 10 degrees. With a resistance to corrosion rating of 304 (CF8), this Ball Valve is simple to handle and easy to set up.
The VG1245ER 1-1/2"" 2W Ball Valve 29.2CV is ideal for steam or chilled water systems, especially where periodic or extended shut off is required.
THE SOLUTIONS FOR Complicated or Difficult Piping Problems, Can Be SIMPLE. Here you have the perfect example of this simple solution with the Johnson Controls VG1245 1 1/2" 2W Ball Valve Stainless Steel Trim.
The plastic body meter ball valve comes with a 1-1/2" BSP threaded port and is made of stainless steel body. The model is well equipped with a chrome plated brass bonnet sphere and a hexagonal handle for convenient operation. It has excellent resistance to chemical corrosion, high pressure resistance and ease of operation. The ball valve is ideal for use in municipalities, municipalities, factories, warehouses, water treatment plants for water supply valves.
Custom-made Ball Valves manufactured using 304 Stainless Steel. The body and stems are made of 303 Stainless Steel with a massive 1-1/2" NPS (nominal pipe size) female threaded inlet and castellated male outlet and Taper Lock plug (keyway). Standard ball valves do not allow you to stop flow below 90% capacity; but this valve is designed to close at 50%.
The Johnson Controls VG1245ER .98" through 1.04" ball valve is constructed of 304 stainless steel with integral bonnet design. The ball control feature is oversized, making it easy to adjust within piping constraints, while the tapered portion allows ease of installation.
A large valve with flow capacities up to 68GPM. Designed for commercial, industrial, or utility applications Ball valves are manual or handwheel actuated. Swivel nuts are available on models with F to III suffixes.
Johnson Controls Ball Valves, Stainless Steel, 1.5" NPT Connection Size, ANSI B16.34 Body Materials, 16 Gauge SS316L Body, Metal Seats and Orings, Stainless Steel Steam Inlet Components
A ball valve is a type of valve designed to control the flow of a fluid (liquid or gas) by allowing it to flow both in a single direction and by shutting off the flow completely. Ball valves feature a "ball" that is held in place by a spring against a seat at one end of the pipe, and a handle on the other end. When this handle is moved up or down, it pushes on the ball, forcing it away from its seat and opening or closing the valve. A rubber O-ring keeps the valve from leaking between the ball and seat. A locking screw on some models holds the handle
Johnson Control
Johnson Controls VG1245ER was supplied by Johnson Controls, Inc. is the largest manufacturer of commercial heating, venting and air conditioning systems in the world with main operations based in Milwaukee, WI.
Valves for Commercial Refrigeration
Free Shipping
In stock
