Johnson Controls VG7241GT+72CHGA "1/2"" N/O 4.6Cv 24v SR Prop"

"1/2"" N/O 4.6Cv 24v SR Prop"

New Johnson Controls VG7241GT+72CHGA "1/2"" N/O 4.6Cv 24v SR Prop"

Johnson Controls VG7241GT+72CHGA "1/2"" N/O 4.6Cv 24v SR Prop"

These Johnson Controls VG7241GT+72CHGA "1/2"" N/O 4.6Cv 24v SR Prop" are made to fit your needs, so you can spend less time making adjustments and more time enjoying the day. These props are made of stainless steel, so you won't have to worry about corrosion.

Johnson Controls VG7241GT+72CHGA "1/2"" N/O 4.6Cv 24v SR Prop", Voltage: 120/240VAC, Current: 4.6A, Phase: 1/2, Max Speed: 3700 RPM, Type: AC Induction

Johnson Controls VG7241GT+72CHGA 1/2"" N/O 4.6Cv 24v SR Prop, controlling the flow of HVAC fluids in residential and light commercial heating and cooling systems including boilers, gear-driven pumps, refrigeration equipment, and air compressors.

Amp Draw 24V DC Current Rating at 120V AC 1/2'', N/O Current - Amps 4.6Cv Peak Surge Current Rating 4.6 Cycles @ Full Load on Grounded Line (%) 50 Full Load on Line Tolerance +/-10 Full Load on Line Frequency 50Hz Line Reactance 3 ohms minimum loss Line Sag 0.12% minimum Vertical Clearance at Heading End Min. 120 Volts AC Heavy Duty Large Base Mounting Studs Yes Vertical Clearance at Base Meeting Code (% of Arm Length) 21.3 Weight 8 lbs

Superior Quality - Johnson Controls SR fans combine durability and quality in a lower price range. The OEMs of choice for various OEMs and material suppliers, they are a great buy.

For a variety of water-cooled air conditioners with up to 72,000 Btu/h external heat, this motor-generator is designed for split systems. It operates external condenser cooling fan and compressor in 24V selectable voltage mode. In generator mode, it starts the compressor or reduces current when load increases beyond set point. In parallel operation, up to three units can be connected.

The Johnson Controls VG7241GT+72CHGA 24 Volt 72 AMP 7.2 KW 110/220-Volt NEMA 12 Standard enclosure with enclosure mounting plate is designed to be suitable for both vertical and horizontal mounting applications. It is designed for single phase 220-Volt or single Phase 240 volt operation with two tandem, thermally limited horsepower motors.

Designed and manufactured with quality and performance in mind, the VG7241GT+72CHGA Propane Gas Valved Heater Ventilator is one of our most dependable and energy efficient equipment on the market today. This ventilator comes with a reinforced housing made of galvanized steel with a baked epoxy finish to better withstand corrosion and other extreme weather conditions. And for added convenience of use, we included an outside heat sensor which activates the unit at 36°F.

Compactors handle a variety of wastes ranging from bulky to fluid. Our compressors fit many different needs from the food industry to the chemical, paper and medical industries.