Johnson Controls VG7842GT+3008B 1/2NPT MIXING 3-6# 4.6CV

1/2NPT MIXING 3-6# 4.6CV

One Fluid Handler, Johnson Controls VG7842GT+3008B 1/2NPT MIXING 3-6# 4.6CV, ideal for drip irrigation mixing. Also for general agribusiness mixing water and chemicals. The VG7842GT 1/2 NPT MIXING Valve provides independent or tandem outlet outlet gate positions; diverter; bypass; pilot; cross; trip; check; automatically extend bonnet, pilot drain valves; pilot drain valve floating drain valve; pilot safety rod, pilot safety pin, pilot safety clip, heavy duty pilot check valve.

The Johnson Controls VG7842GT+3008B 1/2NPT MIXING 3-6# 4.6CV is designed for HVAC contractors and plumbers, and is used in commercial applications under stringent quality control standards. This mixing pneumatic valve features a temperature range of 33 to +266 degrees F, and can be installed to handle both hot and cold water using the appropriate diaphragm.

The VG7842GT+3008B 1/2NPT MIXING 3-6# 4.6CVSplit System Air Conditioner is designed to be installed in a residence or small multi-dwelling unit up to 2 stories high. It is typically not for light commercial applications such as schools, office buildings, hospitals and airports where both high capacity cooling and heating systems are required.

The Johnson Controls VG7842GT+3008B is a 1/2NPT mixing 3-6# 4.6CV electric valve, designed for air conditioning and heating controls, water heaters, boilers and other applications that require mixing.

The Johnson Controls VG7842GT + 3008B 1/2 NPT Mixing 3-6# 4.6CV is a perfect addition to your home. This product is very easy to use and maintain. The Johnson Controls VG7842GT + 3008B 1/2 NPT Mixing 3-6# 4.6CV takes pride in providing you with the highest quality service. Do not deal with unreliable products that will break down on you, when you can purchase this product which was built with excellence in mind. This item comes in beautiful colors and has a warranty that will last for

This Johnson Controls VG series mixing valve with 1/2 inch pipe thread and NPT ports is designed for mixing of hot and cold water as needed in applications such as steam generation or washing machine circulation. This valve is suitable for direct coupled-drive on domestic central heating systems, and can be used as a replacement for up to 20% of domestic hot water requirements. This valve is suitable for use with gas and oil fired boilers, and can be used as a replacement for up to 20% of domestic hot water requirements. It has a bronze body with cast iron pilot operated poppet valves with rigid pilot connections, and

This Johnson Controls VG7842GT+3008B 3/4in. mixing pump is ideal for low-pressure applications where excellent chemical compatibility is desired or required. It can be submersed in hot water, clean steam, corrosive liquids, lyes, alkalis and acids without any detrimental effect on the system. It's also suitable for wastewater sampling and waste treatment applications.

The VG7842GT +3008B mixing valve combines the functionality of a 3-way solenoid valve with that of a 6-position single-stage or 2-stage mixing valve, plus the necessary dead leg drain to provide true stand-alone mixing capabilities. This configuration greatly enhances automation control capability of hot water service applications. It is used in residential, commercial, institutional, and industrial HVAC applications.

Designed for residential and light commercial applications, the Johnson Controls VG7842 Gateway mixing valve series delivers dependable control of boiler water flow.

3.6L X 10W X 3.3H

A compact, variable-speed elevating pump for continuous, low volume applications

Mixing Valves are important in any plumbing system. They act as the main control point for water flow to the entire property. The job of the mixing valve is to blend cold water with hot or warm if mixed together to give you the exact temperature you need.