JOHNSON PUMP JP-28552-24 JOHNSON PUMP Replacement/Spare 500 GPH Motor Cartridge for Bilge Pumps, 24V

Replacement Motor, MFG# JP-28552-24, for 500GPH Cartridge Pumps, 24V.

The Johnson Pump JP-28552-24 is a replacement power head cartridge for the following JOHNSON 500 GPH Cartridge Pumps: 500GPH JP-28551, and the 500 GPH JP-28560. The Johnson Pump Replacement Motor, Model

The Johnson Pump Replacement Motor requires a 24V DC power source and can be used as a replacement or spare Cartridge Motor for Johnson Pump 500GPH Bilge Systems. The JP-28552-24 Johnson Pump Replacement Motor is  - Size: 1.00" x 1.00" - Voltage: 24 VDC - Total Power Required: 6 watts (1 Amp) - Displacement @0.20 PSI: 0.25 gpm (1.0 L/min)  The Johnson Pump Replacement Motor is pre-drilled with all mounting holes and comes with a 5/8-18 threaded

This is the JOHNSON PUMP replacement 500 GPH motor, mfg.

The Johnson Pump Motor is capable of pumping large amounts of water for a variety of popular models. This replacement motor is compatible with the following pumps: H-300-24, H-300-30, H-400-30, & JP500GPHU.

The Motor fits the following bilt-up pumps: JT2050, JT2060, JP1000, JP2115. Manufactured to Johnson Pump original specifications and materials for a perfect fit. Installation Instructions: Replace entire motor assembly - do not wire directly to existing pump. To replace entire motor assembly, 1) Unplug pump from power source. 2) Remove screws from the casing and remove cover. 3) Remove screws from the rotor shaft and remove bearing plate. 4) Using a locking pliers or wrench remove impeller from shaft. 5) Work motor off the shaft by tapering with vice grips

The replacement 24 volt motor is 110-120V single speed, 200-300 RPM. The operating range of this motor is 0 - 85 degrees F.

Pump jockey used this motor in an aquarium/small fish pond project.