KASON - 9124500452 CAM KIT for Kolpak - Part# 106221080

KASON - 9124500452 CAM KIT for Kolpak - Part# 106221080

KASON - 9124500452 CAM KIT for Kolpak - Part# 106221080, KASON - BOSCH Position Sensor, KASON - Bosch Motors, KASON.

KASON - 9124500452 CAM KIT for Kolpak - Part# 106221080 Kit contains the same "O" ring material as found in traditional spring washers. It is used when reconditioning wet disc valves or in applications where a spring lock valve is required for higher pressure.

The KASON CAM KIT 9124500452 is designed for use with Kolpak - 106221080.

KASON 9124500452 CAM KIT for Kolpak 106221080. Kason part no: 9124500452

This KASON - 9124500452 CAM KIT for Kolpak is a genuine replacement part manufactured by Kason. The 9124500452 is used with many Kolpak equipment models including the KOL-1000A DRYER, KOL-1000D DRYER, KOL-10B, KOL-1100 DRYER, KTU-1000A DRYER, KTU-521D SKINNER/STRAIGHTENER, KTU-531D SKINNER/STRAIGHTENER.

This Cam Kit (Part No. 106221080) is for the Kolpak 9000 and Kolpak 9100 Bunkers. It includes all of the components needed to replace cam assemblies on those models.

The popularity of Kolpak equipment with the grain industry has led to a situation where the lifting arms mounted on these rotating heads encounter extreme loading conditions. Over time this can lead to failure of the lifting arm cam and / or the cam support bracket. The new Kason cam kit provides reinforcement that significantly increases the life span of these rotating head assemblies.

"KASON paracord is a premium nylon k paracord made in the USA, strong enough for outdoor use yet light enough for making bracelets. Create a modular paracord system that keeps you prepared wherever you are. - Meets military specifications - Made in the USA - Burn test Passed

Protect your Kolpak 3G16 Hydraulic Hoist from wear and tear. With a durable polycarbonate hard shell, and 360° spinner wheels that ensure a smooth ride, this suitcase is built to last.

Replacing the forklift forks for bush or walk behind trucks, this Cam Kit is designed to assist in the removal of pallets from the top using a forklift.

The M12 CAM® Kit is designed to produce the AM transmitter frequency of 257 MHz. This kit includes a new antenna that is compatible with components on existing 257 MHz M12® block sets. The antenna is adjusted for zero frequency drift at 0°C equal to the new KACO® 12-257 M12®® transmitter model, so there are no adjustment procedures necessary. Construction of the antenna is standard using the RF connector already attached to the power cord, so it can be easily mounted on existing equipment.