KMC Controls CTE-5103-10 "2x3 T-STAT "2x3 T-STAT

"2x3 T-STAT

KMC Controls CTE-5103-10 "2x3 T-STAT serves as a communications translator between most RTD type sensor inputs and a 5V S* bus. It also converts the Analog input voltage to a proportional, scaled voltage for control logic use. The CTE-5103-10's output is intended for driving up to 2 field plugs/terminals with 10A, non-isolated, rated at 250VAC. A handy feature is the ability to set

KMC Controls CTE-5103-10 “2X3 T-STAT” CTE-5103-10 Heat Controller 3 Point Electric, Individually thermostatic controller w/o disconnects for 150 or 120 volt, 10 Amp Double Pole Solid State Relay automatically turns on and off to maintain set temp.

KMC Controls CTE-5103-10 2x3 T-STAT each 2 terminal **

KMC Controls is proud to offer a new line of T-STATs designed to provide a combination of leading edge technology and value-added features. The new T-STATs are available in standard and high temperature high accuracy configurations. The standard “2x3” design allows for three independent sensors to be configured with the onboard software giving users an unprecedented combination of control flexibility and ease of installation. The “2x3 High Accuracy” version features industry leading accuracy (+/- .

The CTE-5103-10 2x3 T-STAT is a single and three zone thermostat wired for 2 heating zones and 3 cooling zones. The CTE-5103-10 may also be used with up to 4 on/off or proportional thermostats.

The KMC Controls CTE-5103-10 2x3 T-STAT is a single pole, three position temperature controller designed to interface with the CT4P04 and CT4P16 panel mount thermistors. P/N: CTE-5103-10

This Digital T-Stat has two stages, making it a perfect fit for the KMC Controls Home Automation System. It has 3 wires in and 4 wires out, with P/T and reset. Featuring a 2x250W maximum load, this Device can be used to control some of your home's street lights and other low power high load devices.