KMC Controls CTE-5104-10 "TstatKit "TstatKit

"TstatKit

The "TstatKit" from KMC Controls is a ready-to-install replacement for a whole house mechanical air conditioning thermostat. It allows you to pre-select your comfort level prior to entering the room. The "TstatKit" will engage the mechanical cooling equipment when the temperature rises above your selected temperature. It will also save energy by engaging the equipment before it becomes too warm, avoiding the need to cycle the equipment on and off too often.

TstatKit

KMC Controls CTE-5104-10 "TstatKit used with "P" Series digital room thermostats (See P/N: CTE-5104-11)

TstatKit is a ready-to-use thermostat control system to monitor and control a wide variety of heating devices: electric furnaces, electric heaters, gas furnaces, and metal halide lighting. The TstatKit system is able to provide up to 59 watts of power to each device connected to it.

This KMC Controls TstatKit 5104-10 is used on Carrier and Bryant Heat Pump Thermostat Boards. The kit includes the following parts: 1-Membrane Switch, 1-Cover, 2-Screws, 1-Nut, 1-Washer.

The TstatKit is user selectable for either single stage or two stage heating and cooling. The outdoor temperature sensor can be mounted on top of the unit or inside a wall. The professional grade control provides the installer with a two stage heating and cooling choice of five set points and three fan speeds. An LED indicator will inform you of any tapped voltage loss before any damage occurs. This transformer has been designed to replace any single pole or two pole contactor type t-stat.

TStatKit , TstatKit2 and NStat are small, battery-operated temperature controllers with a compact design that allows them to be used with nearly any type of thermocouple probe.