KMC Controls RCC-1503 Bias Adjustment Reversing Pneumatic Relay with In-line Mounting (9 PSI Calibration)

REV.RELAY 9# C-O

RCC-1503 (Lightly Propelled Bias Adjustment Reversing Relay) Relay kit has 3 operating modes (0-90 degree CW, 0-90 degree CCW, and 90 degrees Full Span). The system is direct connected to the tire valve stem and has removable wire plugs for quick changes of directional movements. This relay comes with a 9 PSI calibration.

Industrial grade single and double throw pneumatic reversing relays for use in many manufacturing and industrial applications. Contact actuation 3/8" (9.5 mm) Card

High output Spring return reversing relay with a built in controller. This relay is designed for intermittent duty and can be used for all types of valves (check valve, spool valve etc.)

KMC Controls RCC-1503 Bias Adjustment Reversing Pneumatic Relay

Applications: Industrial machinery, load cells, pneumatic transducers, linear actuators. Use to provide a reversing function on a non-reversing controller. Relay is rated for 5 VDC coil.

The RCC-1503 is an adjustable relay capable of reversing a 5/8 in. (16 mm) solenoid valve in a directional control signal. The relay has a safety interlock which will not allow the relay to fire if the safety guard is not in place. This unit provides an adjustable bias on the output plunger.

The KMC RCC-1503 Series are pneumatic, dual acting biasing reversing relays designed for use with NEMA 4X oil and water filled motors to control speed or direction. The relay is switch operated on a low current, normally closed (NC) or non-latching normally open (NO) SPDT miniature plastic air valve actuator to electrically actuate the high pressure switching mechanism. The RCC-1503 is