Danfoss 060-203191 KP-15 PRESSURE CONTROLLER

KP-15 PRESSURE CONTROLLER

The Danfoss KP-15 pressure controller is a high quality, high performance controller that provides proportional pressure control of both hot and cold water to any residential or commercial building application

We are the authorized distributor of Danfoss products

The KP-15 series with 72 bit PLC algorithm, the controller provides exceptionally fast pressure response, fast reaction time to system changes and ease of use

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is a high pressure, general purpose, proportional control valve that delivers excellent performance when used with a variety of liquids and gases

Neuco Inc is a leading distributor of components and equipment in North America

This controller has been designed with durability and longevity in mind, with an Aluminium housing that is resistant to corrosion from the harsh atmosphere that surrounds it

1% output accuracy (3% over the full working range)

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is an industrial Pressure Controller, which is a type of thermostat that uses a bi-metal or bimetallic strip to control temperature

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is a frequently purchased product on Amazon

The unit is also compatible with all pressure transmitters on the market for greater reliability

Once the set point temperature has been reached, the 060-203191 KP-15 PRESSURE CONTROLLER opens and closes a spring loaded valve to create a pressure differential between inlet and outlet

Valves and pump stations can be protected against over-pressure, while compressor suction lines are protected against negative pressure

A Danfoss KP-15 Pressure Controller is a pressure control valve that uses different temperature settings to keep heat exchangers or air-conditioning units working properly

The discharge characteristic is linear and can be altered by changing the spool characteristics (Kp)

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is a direct digital control valve for compressor protection and process control applications

When installed with the other accessories of the Danfoss CX System, this controller can be configured for heat tracing protection of pipe insulation and to close air valves on air conditioners and other similar applications

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER has been designed for water heater applications

The KP-15 automatically controls the pressure or vacuum in a system

The KP-15 series can replace pressure transmitters, level transmitters and feedback units

The KP-15 series provides the stability needed in more demanding applications

The Danfoss KP15 pressure controller is a compact, non-programmable proportional pressure controller with internal proportional element, 0

This pressure controller delivers excellent performance and cost efficiency when used with a variety of liquids and gases

The Danfoss KP-15 Pressure Controller is a precision control device used in system protection

The pressure difference causes flow through the orifice that connects the two sides of the device

It is primarily recommended for saturated steam applications, but it can also be used for saturated or superheated liquids such as hot water, oils, gas or slurry