Danfoss 060-202691 KP15 PRESSURE CONTROL

KP15 PRESSURE CONTROL

Responses to rapid changes in the demand for heat. It features a unique pressure control technology that allows it to respond to rapid changes in heating demand. No matter how the heating demand changes, it is possible for the equipment to respond as quickly as desired. KP15 PRESSURE CONTROL also has a temperature compensator setting, which makes it possible to accurately adjust the ambient temperatures without risk of unplanned production stops.

Danfoss 060-202691 KP15 PRESSURE CONTROL is an automatic microprocessor controller available in dual and triple outputs for residential applications. A Danfoss high performance pressure sensor provides efficient operation of vdH load control and pump start/stop. The controller employs a CAN bus connection for implementation into a wide range of systems, including building automation systems.

The Danfoss pressure control, KP15, is used in refrigeration and heat pump applications, as well as unit heaters, to convert the pressure of a refrigerating or photovoltaic compressor into the desired level of circulating refrigerant in hot-gas heating systems.

The KP15 controller can serve as an output for a low phase on your heating loop, but it can also be used to control the pressure in the loop. For example, if you had a cooling based cooling loop and wanted to do cooling directly from the pump. Just install the controller in place of your current pressure controller, set it at 5 or 6 bar and adjust your boiling temperature.

The  Danfoss 060-202691   KP15  pressure  controller is one of the most powerful controllers in the Danfoss portfolio. It can handle temperatures up to ±150 ° C and it can be used in refrigeration systems, heating systems and air conditioning units.

The Danfoss K-P15 pressure control is a state-of-the-art controller that is self-adjusting and provides outstanding performance and reliability. The Controller has a range of 6 - 21 psi (0.4 - 1.6 BAR).

Simple, fast pressure regulation and monitoring of the water circuit. Got 25-600 mbar (3-80 psi) increase/decrease range - thanks to 20 bar maximum pressure / pump pipe capacity!