LENNOX 36M63 L130-20F LIMIT SWITCH L130-20F LIMIT SWITCH

L130-20F LIMIT SWITCH

The 36M63 L130-20F LIMIT SWITCH is designed to be used as a manual limit switch, handheld switch, motion detector switch or safety light switch for electric and pneumatic valves. This 36M63 L130-20F LIMIT SWITCH is rated at 250 Vac, 15A and features a 1 in square mounting area, 0.5 in of travel with a time setting of 0.5 to 5 sec and will operate on DC voltages from 12v to 48vdc.

The Lennox 36M63 L130-20F LIMIT SWITCH is used to maintain the Limit control function (LIM) in a Lennox Tri-Fuel furnace.

There are two available options: L130-20F standard limit switch or L130-20F special limit switch. If you use the standard limit switch, you can see its non-ignition function limitation range from -30 degree to of the medium temperature; if you use the special switch, its non-ignition function limitation range from -20 degree to of the medium temperature.

The Lennox 36M63 Limit Switch is designed for use with the Lennox 36M61 Circulator Motor and L130-20F Limit Switch. This limit switch has a 20 Amp rating, and is used as a reset switch or as a control for the following furnaces:

The LENNOX/CPI 36M63-L130-20F LIMIT SWITCH, in stock at The Phoenix Contact Company, is a hardwired device used to interrupt a circuit when the contact position has been reached. This type of limit switch is frequently used as a safety interrupter in mechanical systems such as press brakes and punching presses. This product has been tested and certified in accordance with UL standards.

WORKS OF LENNOX SERIES LIMIT SWITCH WHICH IS USED FOR AUTOMATIC OPERATION AT THE TIME OF HEAT AND AIR CONDITIONER SYSTEM.

Limit Switches for Lennox Air Conditioners