SCHLAGE L583477 L583-477 STD MODULAR CYL CAM FOR 1.25, 1.5, 1.75 IN

L583-477 STD MODULAR CYL CAM FOR 1.25, 1.5, 1.75 IN

The Schlage L583477 L583-477 STD Modular Cyl Cam for 1.25, 1.5, 1.75 in door is the highest on our chart at 4 5/8 inches and adapts to normally closed mechanical locking systems from 0.25 to 1.75 inches in diameter (Diameter of Passage). This compact cylindrical cam is a non-handed cam and comes with one square edge. The Schlage L583477 L583-477 STD Modular Cyl Cam for 1.25, 1.5, 1.75 in is designed to have a deadlocking

The Schlage L583477 L583-477 STD Modular Cyl Cam for 1.25, 1.5, 1.75 in . locksets are equipped with spring-loaded cam locks that engage a keyed cylinder to regulate the locking and unlocking mechanism. The cyl lock can be attached to a wide variety of parts, including doors, drawers, file cabinets and other furniture pieces to ensure your property is kept safe at all times.

The Schlage L583-477 Standard Cylinder is for use with most Schlage deadbolts and locksets. In radius 1-3/8 inch to 2-5/16 inch, featuring a 2 inch backset.

The L583477 CAM, used in L583 Series Mortise Lock, is a modular cylinder cam designed for use with a variety of locks listed below it. It has a 1-1/2 center to center hole spacing, and is made of hard-coat zinc die cast. The cam rotates on four rollers and fits over the rearmost two guide pins.

A favorite among ATM installation professionals, this full-sized actuator is designed for use with 1.25", 1.5" and 1.75" cylinder cam locks. Easy to install, it operates with a medium duty magnet. Verify that your existing lock mechanism can accept a spring or screw type locking assembly prior to making your purchase.

Choose Schlage for the latest and greatest in home security technology. The Schlage L583 Series is a highly adaptable locking cylinder system that allows locksets to be easily converted to keyed-alike or keyed-different.

Add an additional touch of security to your front or entry door with the Schlage B530 CAM. This cylindrical cam is designed for 1-inch (1) and 1 and 1/2-inch (1 1/2) rosette door hardware systems in slate gray. Featuring a zinc finish and a square corner, this cam can also be used as dead bolt when paired with the Schlage B530 CYL knob.