Honeywell 2264 Upgraded Replacement for Furnace Gas Valve VR8200A.

PRESSURETROL W/ADJ THROT RANGE 10-3

The Pressuretrol W/Adj Thr is used to control and limit the rate of gas flow to a furnace or water heater. It is pressure-operated, and requires a 7 in. wc pressure source.

This Pressuretrol™ has a direct replacement for Honeywell part: 2264 and is a three-wire, feedback (carbon) type regulator for use with natural gas, propane, oil or fuel oil. It utilizes the industry standard  float arm with air venturi to meter gas, and comes complete with all required mounting brackets.

Pressure Switch, up to 10-3/4 in. W x 8 in. H, 2 Way, 1/2 in. FNPT x 1/2 in. MNPT, 240VAC

The Honeywell 2264 is a Replacement for Furnace Gas Valve. It features an Adj Max Temp of 775 degrees F, a Max Pressure Rate Of 7,100 PSI, the Universal Hot Surface Ignition System Built in and more.

Pressure Control Valve • Replacement for VR8200A Honeywell Furnace Gas Valve • Always replace the complete Pressure Control Valve assembly if the process venturi is changed out.

A pressure regulator valve assembly can be installed in a natural gas or propane fuel system as the first control device in the supply line of a gas appliance. The pressure setting is adjustable with an externally mounted adjustment control, which is located on the valve body. if power to the unit is interrupted due to an electrical fault or temperature sensor failure, the limit control will not function and the limiting orifice plug will open to vent gas via an exhaust port in the valve body.

Our Pressure Relief Valve is a direct replacement for the leaking original. It has been tested and re-designed to operate in all ranges of normal conditions. It will fit most applications and is not designed to withstand excess pressure.