Lennox 10F83 MIXED AIR THERMISTOR SENSOR 3K

MIXED AIR THERMISTOR SENSOR 3K

Lennox 10F83 MIXED AIR THERMISTOR SENSOR 3K is a product of Lennox Air Conditioning. It is manufactured and sold with warranty and guarantees by Lennox Air Conditioning.

Lennox 10F83 MIXED AIR THERMISTOR SENSOR 3K

The Lennox 10F83 MIXED AIR THERMISTOR SENSOR 3K will solve your heating problem. Designed for reliable performance, the parts offered in this sale are all factory tested and we offer a one year warranty on all of our products.

THE MIXED AIR THERMISTOR SENSOR 3K AND ITS INSTRUCTIONS ARE IN CONJUNCTION WITH THE USE AND INSTALLATION OF THE LENNOX BACNET BASED HVAC SYSTEM FOR THE OLDER BOILER MODELS AS FOLLOWS:

Lennox 10F83 MIXED AIR THERMISTOR SENSOR 3K - This part is used in the following types of Lennox Air Conditioning units: Legacy/Legacy Plus/Prodigy/G-Series.

The Lennox 10F83 MIXED AIR THERMISTOR SENSOR is a compatible remote sense mixed air thermistor with a 2 ft. sensor cable. The 3K temperature coefficient of the sensor with a -3 to 3K linear resistance value provides an excellent range for most applications. This compatible remote sense mixed air sensor will provide an optimal heating and cooling system performance.

The Lennox 10F83 Mixed Air Thermistor Sensor (3K) is ideal for use with heat pumps and all operating environment units. The sensor will help to prevent damage if the coil freezes due to high ambient air temperatures.

The Lennox 10F83 Mixed Air Thermistor Sensor is for use with Select Lennox Model Gas Furnaces.

The Lennox 10F83 Mixed Air Thermistor has a voltage of 24VAC/VDC, the temperature operating range is 4 to 140 degrees Fahrenheit, and an interconnect cable length of 26 inch.

The Lennox Mixed Air Thermostat measures the temperature and turns the heating system on and off. It maintains a constant temperature in the home by cycling the heating system on and off as appropriate. It features a small footprint to fit any area where you need to install it.

Each sensor is factory calibrated and checked for wave form. The 10F83 is put through a rigorous 100% humidity test. After the sensor is tested, it will then be calibrated at 4 different temperatures to verify that it meets the performance requirement of ATSHA Standard 100-C22.

The G21i Blower Coil is designed with pre-engineered modules to fit certain Lennox® HVAC systems. This part is manufactured under high quality standards, and is designed for optimum reliability, efficiency, and performance.