Lennox 10G19 3P 24V COIL CONTACTOR

3P 24V COIL CONTACTOR

The 10G19 3P 24V COIL CONTACTOR is designed to toggle one or more 24-volt coils. It is UL and CSA listed and meets NEMA specifications.

The Lennox 10G19 3P 24V COIL CONTACTOR is a device designed to help control electrical current. This piece has a coil and features thermal overload protection and slow blow AC fuse-type protection.

The Lennox 10G19 3P 24V COIL CONTACTOR is suitable for use with existing Honeywell and Trane gearboxes. It is fully compatible will all brands of boilers and will work with other similar devices where this rating is required. This coil contactor has a 24V coil rating and provides reliable performance in a NEMA 1 enclosure. It is designed to interchange with any existing 10GB series device.

The Lennox 10G19 3P 24V Coil Contactor is a replacement coil contactor designed to last for years to come. This item is perfect for new units or replacements for old, failing machines. This item is in stock and arrives within one business day, so you will be up and running as quickly as possible.

The 10G19 Coil 3-Position Contactor is designed to control the 24 Volt AC and DC systems in mini-splits and heat pumps. It will replace the 5CG24C contactor used by many brands of heat pumps. It provides three output functions with two terminals. The connection wires must be switched for different circuits.

Control of heating and air conditioning systems demands the highest level of performance. Lennox coil contactors deliver that performance with unmatched dependability. Our low voltage, solid state or liquid filled units meet all HVI/C-UL listing requirements, give years of trouble free service and offer a wide range of features and options.

The 300 Series coil-type contactor is designed for use on Lennox® gas and oil furnaces. It has an output of normally closed contacts rated 10A/208V, 20A/240V. The 10G19 also features a thermal manual reset that resets to the ON position if the contacts become stuck in the closed position due to overloading or short circuiting. When used together with a compatible furnace, the 10G19 provides short circuit protection.