Lennox 10M74 155F-OUT 125F-IN INSERTION LIM 155F-OUT 125F-IN INSERTION LIM

155F-OUT 125F-IN INSERTION LIM

The Lennox 10M74 155F-OUT 125F-IN INSERTION LIM is a type of central air conditioning system. This system uses two parts, outdoor unit and the indoor unit.

"10M74 155F-OUT 125F-IN INSERTION LIM

The Lennox 10M74 155F-OUT 125F-IN INSERTION LIM is intended for use as a furnace in residential installations. It has a two-stage gas valve to ensure quick and smooth start up. This unit features generous amounts of insulation, including the patented Quadra-Heat Dual Fuel mesh panel which increases the efficiency of the unit.

A New Lennox® Insertion Liner for the 10M74 Insulation System that replaces PLM82-155F-OUT and PLI82-125F-IN. The new 154977L1PLM82-155F - OUT INSERTION LINER provides -15 degrees Fahrenheit (5 degrees Celsius) of additional protection to the outside wall of the home and is rated for up to nine (9) inches (225 mm) of fiberglass batt insulation.

Designed specifically for Lennox equipment, this insertation limiter installs into the air handler and controls supply air temperatures for proper air-flow. This insertion limiter is also designed to activate a heat alarm at a preselected temperature. It is designed for use on the following Lennox equipment models: Residential Packaged Gas-Fired Water Heater, Residential Packaged Gas-Fired Air Handler (S/N LCA04A042 and below), Residential Packaged Electric "C" Air Handler

This Lennox 10M74 insert is compatible with the following furnace models: LEN8424X; LEN8428X; LEN8442X; LEN1211B054.

The Lennox 10M74 is an Air Conditioner that is manufactured by Lennox. The Air Conditioner has the APFc rating of 38.0 and the EER of 11.9. The Air Conditioner comes in a kit that includes (1) the M5115K17090AA, (4) 18x18x3 MERV12 filters, (2) 3/8 compression fittings CABLE GROUNDING REQUIRED, (1) power cord, (1) compressor start/run capacitor and the mounting bracket options to fit virtually any application.