Lennox 20G52 DPDT 24V 1/8HP BLWR RELAY DPDT 24V 1/8HP BLWR RELAY

DPDT 24V 1/8HP BLWR RELAY

The DPDT 24V 1/8HP BLWR RELAY is used for controlling door bell or other simple electrical switch from the 120V AC supply.

The DPDT 24V 1/8HP BLWR RELAY will control the load referenced to COM 24St.

Our DPDT 24V 1/8HP BLWR RELAY Model#: 20G52 is used in Residential and Mild Commercial applications. This DPDT relay has a normally closed NC contacts rated at 15A @125VAC and a normally open NO contacts rated at 25A @125VAC. All of our products are new and covered by the manufacturer's warranty.

The Lennox 20G52 DPDT 24V 1/8HP BLWR RELAY is a standard open frame single-throw normally-open relay in 24 VAC/VDC. It has one coil and two contacts. The contact rating is 5 amperes, 125 VAC/VDC.

System Voltage Range 9 to 12VDC Circuit Type DPDT Switches On Both Poles 24V 1/8HP BLWR RELAY

Lennox 24V 1/8 HP Blast Relay with Leads for Accurate Temperature Control

Our DPDT relay is one of the finest in the industry. It is UL recognized and CSA certified, and has life cycle rated contacts to ensure durability. Our DPDT relay features double sleeve contacts on an 1/8" screw base with low voltage (24V DC), 10W capacity, and a holding current of 20mA. It is painted gray to comply with nEMA4X coating requirements.