Lennox 49M50 HIGH PRESSURE SWT 640psig C/O

HIGH PRESSURE SWT 640psig C/O

The 49M50 HIGH PRESSURE SWT has a 1.07 GPM at 640psig capacity, and is ideal for residential heating and water applications. It operates at an efficiency of 90.5%. It is available as either a horizontal or vertical flow model, with an economizer option available for horizontal units only. The 49M50 features heavy gauge galvanized steel construction with baked-on powder paint finish to protect against corrosion from moisture and humidity that results in product durability and reliability for many years to come.

The Lennox® high-pressure, hot water baseboard heating system is designed to deliver superior comfort and efficiency in home heating applications. The system's maximum pressure of 640psig (5050kPa) makes it ideal for capable of enduring hard water conditions and quick recovery from accidental freezing. With a design that offers web-type heat exchange to provide improved heat transfer and air distribution, a fully insulated mineral wool enclosure for tight and efficient installation, and a hardened heavy gauge brass body, you can rely on the Lennox high-pressure hot water baseboard heating system to provide years of trouble-free service.

PVH-P213 Valves are designed to handle the high thermal stress and loads of an HVAC by distributing the refrigerant to the jacketed coils in the air handler. PVH-P213 Valves can handle up to a 99 CFM (640 PSIG) flow at 40° F entering.

Finally available - Lennox high pressure burner and its companion Control Valve. This is the highest rated burner in the industry with proven technology. It is rated for 675,000 btu/hr, which means it can handle any residential or light commercial application. It's low NOx rating makes it sympathetic in today's green building market allowing for LEED points.

The FM49M50/10-2 is a 50 ton, single stage gas fired scroll compressor with solid shaft motor. It is available in two voltage configurations: 230/460 volt or 460 volt only.

The Lennox® VENTMOUNT™ High Pressure Steam system is an innovative heat exchange unit that offers high efficiency and durability. This product features a reliable design, easy-to-service components, and the ability to maximize the efficiency of each installation in which it is installed. With a touch-grip comfort control and anti-vibration motor mounts, this unit provides dependable performance, at a cost effective price.

The Lennox 49M50 high-pressure switch is for use with the 686/IAQ h.p. or IAQ h.p. single stage gas furnace to control the high limit and pilot assembly in operation as well as the compressor run time, economizer, and defrost functions.