Lennox 49W23 R410A Bi-Flow Drier R410A Bi-Flow Drier

R410A Bi-Flow Drier

The Lennox® R410A Bi-Flow Drier is designed to provide enhanced efficiency, in both heating and cooling applications. The R410A Bi-Flow Drier is the most popular of all the Lennox® driers because it offers the best total cost of ownership.

Lennox's advanced R410A and single-stage condensing systems are true building blocks for a high-performing system. Now, with the all-new R410A Bi-Flow Drier, you will benefit from advanced drying technology for consistent, efficient performance.

Lennox R410A Bi-Flow Drier is fully charged with refrigerant. No need to run lines or check pressures. Perfect for replacing an R22 system that has not been charged with refrigerant, updated with all the latest safety components, eliminating the need for dual wiring, bi-flow drier, no oil lubrication or service required during first 2 years

The W23 Lennox 49W23 R410A Bi-Flow Drier has a voltage range of 208-230V, a current range of 30-5A. It has a total capacity of 5.24 CFM and a condenser heat exchanger. It's dimensions are 3"H x 20.9"L x 15.8"D, it weighs 69 lbs.

Lennox 49W23 R410A Bi-Flow Drier is an aftermarket replacement for the Lennox 13AC388 compressor compatible with most Lennox 13/14/15 SEER units.

The Lennox 49W23 R410A Bi-Flow Drier is designed for air conditioning units using R410A refrigerant. The Lennox R410A filter drier will help ensure the system is efficient, protecting the compressor and extending the life of the unit.

The Lennox R410A Bi-Flow Drier is used to remove moisture from refrigerant lines on both new and existing air conditioning systems. It it a bi-flow drier which separates the solution into two streams that reduce the amount of moisture compared to a non bi-flow drier.