LENNOX
LENNOX 61M04 COND COLLAR ASSY
COND COLLAR ASSYLennox 61M04 Cond Collar Assy, Part Number: 00024434, 61M04, Lennox, UnitrodeThe Lennox 61M04 Cond Collar Assy is a replacement part for Lennox furnaces. This part measures...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountCOND. PUMP ASSEMBLY
The Condenser Pump Assembly is used for cooling air that passes over the outdoor coil. It contains the motor and fan blades that blow forced air across the Evaporator Coil.
Turn your Lennox Packaged Unit into a high efficiency Packaged Unit and save energy. This Condensate pump assembly comes with the necessary tubing for installation.
The Lennox condenser pump assembly transfers a refrigerant vapor from the outdoor heat exchanger coil to the indoor air-conditioning coil. This system has a 50-pint compressor, 6,500 BTU/hr. Outdoor Liquid Line Solenoid valve
The Lennox 500E39 Condensate Pump Assembly offers professional grade models that are designed to optimize HVAC efficiency and reliability by keeping external condensate from infiltrating the return air path of the blower.
The Lennox XC25-12 condenser pump is a self-contained unit. The pump assembly is designed for the XC25-12 condenser and fits onto the condenser magneto protector.
The Lennox Condensate Pump mounts to the bottom of the indoor air handler. The pump will automatically pump condensate out into a drain line using an electric flow switch. This self-priming pump has a maximum drainage head of 10' above the pump after installing up to 12" extension pipe. Full 1/2 HP operation. Electric motor is UL listed and meets Federal Standard C82 requirements for insulation, leak testing & polarity.
An assembly consisting of a housing, a bearing, a diaphragm, and a cover. The diaphragm, which is flexible, separates the interior of the pump housing into a pressure side and suction side. The cover mounts on the front end of the pump housing with screws and fastening devices. The bearing is mounted between the pivoted ends of the diaphragm. The bearing provides shaft support and adjusts travel of the diaphragm under vacuum or suction pressure from indoors air coils that have been located with various control devices.