ARMSTRONG AIR 52M30 20462202 MOTOR-BLOWER 1HP 208-230/60/1

208/230V 1Hp Blower Motor

Air Series Blower Motor-Armstrong 208-230. Air moving performance at a reduced energy cost for use with major brands of air systems in many diverse applications including vents, air distribution, curtain exhaust, aisle exhaust, dry scrubbing and gas purging. Features include: Filtered front access panel; silver powder epoxy finish; equipped with spring air braking system; two ten foot leads; one hour at full load and overload protection; 208/230V 1H range; specially compounded coils for reduced sound levels; 20-45 cFt/BHPH supply voltage range; 1HP continuous and 2 HP peak

Powered by a 1-hp motor, this blower features a 208/230V, 60Hz, single-phase design and uses a 7-ft. power cord. The venturi type air moving device self-traps air as it is forced down the venturi throat at varying velocities. For optimal performance, each blower must be matched with the appropriate combination of impeller, diffuser, and enclosure.

The Armstrong Air 52M30 20462202 motor-blower, 1HP 208-230/60/1Hp, complete with a heavy duty steel grille, features a one-piece through hub and shaft. Its split phase induction motor can be used as a totally enclosed fan or it can serve as a direct drive fan with the use of pulleys and belts.

An ideal blower motor for high temperature applications where valuable wires are present, The Air 52M30 is a 20462202 motor designed to handle 1HP at 208-230/60/1.

This motor is a one-speed 1HP. 208-230/60/1, 1140/1725 RPM with open drip proof design.

Armstrong Commercial 1 Hp Air Blower Motor. This 1 hp blower motor is commercial quality with a fully-enclosed, single-speed fan wheel, pre-lubricated and ready to run.

1 hp 208/230/60/1 phase. Power: 1 hp 208-230/60/1phase; three wire, 15 amp 240V. Airflow: 53 cfm. Sound Pressure @ 7 ft: 73 dBA. Enclosure: NEMA 1. Shaft extension : 3 in..