Lennox 66J54 460V -> 24V 70VA Transfomer

460V -> 24V 70VA Transfomer

Lennox® 460V -> 24V 70VA Transformer (66J54)

A 24V 70VA transformer for use with the following: - Lennox® HQI & HSI Gas Valve Conversion Kit - Trane® L24i, L38i & LXI Gas Valve Conversion Kit and Tracer IV™ Gas Valve Conversion Kits

The Lennox 66J54 is an Input voltage to 24 VAC 70VA secondary dry transformer. This transformer is typically used on older forced air furnace systems that were originally installed with a 460V primary current, and are in need of being converted to 24V. If you are unsure what type of power your system currently needs, please consult a certified HVAC technician before using this product.

The Lennox® 66J54 – 24V/70VA Power Transformer allows you to power a blower motor and accessories that operate on 24 Volts from a 460 Volt source.

This 70VA transformer is used for converting 24VDC systems to 460VAC systems.

The Lennox® 24/70V Generator Transformer provides you with the flexibility to choose between 460V and 24V power for your generator. The 24/70V-1/10kva is also available in the 460 VAC 60 Hz sources. They are intended for automatic transfer switches (ATS) with a maximum transfer rate of 20A @ 460VDC and are typically used with generators rated at 36,000 to 50,000 watts at full load. It supports three independent systems for "always on" loads not directly under the control of the generator power management system, while still allowing engines to be shut down

Transform your 460 volt system to 24 volts with the LENNOX® Transformer. For use with Lennox® G24i, G24IC, G30i and some G23 furnaces with 460 volt motors. Reduces starting current in a standard split-phase motor from 15 amps to only 3 amps, which extends motor life and helps prevent premature failure.