Lennox 67K32 ".34""wc SPST Pressure Switch"

".34""wc SPST Pressure Switch"

The Lennox 67K32 ".34""wc SPST Pressure Switch" is a replacement part in the Lennox heating system. This Pressure switch should be replaced every four years of use in a system to prevent fire.

If you're looking for a Lennox 67K32 ".34""wc SPST Pressure Switch, then you've come to the right place. We offer a variety of air conditioning supplies, including Lennox pressure switches. Purchase yours today!

The Lennox 67K32 pressure switch is made in the united states and is compatible with any unit that uses a 34""wc SPST Pressure Switch.

The Lennox 67K32 is a 34""wc SPST Pressure Switch that controls a 37,000 BTU Humidity And Special Sensor Heating. This part is used in 24V DC applications.

A Lennox® 67K32 .34"WC SPST pressure switch has a short "ON" time, indicating proper flame adjustment. Pressure switches help to minimize your energy costs by indicating when the gas valve should be shut off.

The 0-300 PSI Switch measures 3"" in diameter and 2"" in length and switches at 200 PSIG. The SPDT pressure switch features a white ABS body with a brass lever arm switch inside, a black grille frame, and an aluminum cover. When the switch is in the OFF position, the lever blocks the flow of gas into the system.

The Lennox® 67K32 is a bypass type pressure switch intended for use in an automatic standby system. The device is equipped with an operating pressure switch that operates at the design pressure of 318 psig (23.5 kg/cm2 gage) and an alternate operating pressure of 139 psig (10.75 kg/cm2 gage). This switch is rated for natural gas or propane operation, and is designed to operate a fan motor during automatic standby conditions only when the primary gas supply to a system is not in service due to a high or low gas flow rate or low backpressure condition.