LENNOX
LENNOX 190375 COMBUSTION BLOWER ASSEMBLY
LENNOX COMBUSTION BLOWER ASSEMBLYThe Lennox Combustion Blower Assembly is made to fit Lennox Heatac motor sizes. The 1905 and 1906 blower assemblies are equipped with a pulley that fits the heatac...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountBlockedVentSwitch 300F M/R
Lennox dealer offers BlockedVentSwitch 300F M/R equipment online.
The BlockedVentSwitch 300F M/R is designed to prevent condensation from blocking the vent. It has a streamlined design for concealed installation and maximum durability thanks to Lennox's weather-resistant components. This Not just any blockedventswitch. This one has the patented Weather Resistant Device (WRD) and Universal Power Interlock (U) interlocking casings for reliable performance. The BlockedVentSwitch 300F M/R is also designed with several features to ensure convenient installation, including frozen-over indicator and a lever that makes it simple to remove an inoperative switch if needed.
The 71G17 BlockedVentSwitch 300F M/R Thermostat is designed to be low voltage input only, and DOES NOT have a power output terminal. Please note that the BlockedVentSwitch cannot be wired for power operation. If operated at more than 10% of its maximum rating, the unit may be damaged.
The BlockedVentSwitch 300F is a multi-range thermostat for use with a two stage furnace. The BlockedVentSwitch 300F is designed to be inserted into the duct work and set into the sheet metal return air vents to regulate the return air temperature.
The Mul/Run BlockedVentSwitch 300F Media Blower is fully assembled and factory tested to ensure that it operates efficiently and with minimal noise levels. This blower is convenient for continuous-duty operation, as well as cyclic applications, and has a maximum inlet temperature of 280°F (138°C).
The Lennox® 71G17 BlockedVentSwitch™ 300F is a blocked vented switch that uses the dual gas valve to terminate combustion air in the furnace when multiple zones are off and terminate combustion air to the burner when all zones are on.
The BlockedVentSwitch is an electric, direct-acting thermal overload protection device. It is designed for use on gas furnaces as an integral part of the safety system. You can also use it to protect any type of high temperature and high pressure vessel. Features include Operating temperature range: -40 Degree-380 Degree Fahrenheit