Lennox 71K11 ".75""wc SPST Pressure Switch " ".75""wc SPST Pressure Switch "

".75""wc SPST Pressure Switch "

Lennox 71K11 ".75""wc SPST Pressure Switch "

This Lennox 71K11 .75""wc SPST Pressure Switch is designed for use with all gas-fired heaters and boilers, as well as hot water heaters. It's rated for operation at a maximum of 80 psi and a temperature range of 60 degrees to 150 degrees F. The pressure switch has an LED indicator that is lighted when the switch is engaged, and it has a white polymer construction for corrosion resistance. Let us know if you have any questions about this pressure switch.

A pressure switch is an electrical sensor used to measure fluid pressure in systems like water heaters, refrigerators, and air compressors. The 71K11.75"wc SPST Pressure Switch by Lennox is designed for use with all gas-fueled heat sources and includes a built-in reset button that prevents damage to the units ignition system.

The Lennox 71K11 Pressure Switch is used with the Lennox AC71 Series Heat Pumps and are used in capacities from 1 ton to 2.5 tons. It includes a 6ft 12-3 prong power cord and screws(thermoplastic). The Model Number of this Lennox 71K11 Pressure Switch is 71K11.0000. The warranty information supplied with all of our products is legitimate and was obtained through communication with the manufacturer.

C-7311A Pressure Switch

Easy to install in minutes. The 71K11 water-cooled gas furnace pressure switch is designed for use in furnaces that are piped with copper pipe. It has a female nipple 3/4" x 20 tpi solder compression.

Suggested Replacement Filter for: Lennox 71K-11  .75" 20-25 MCA Elbow Watts 914A02 Furnace