Lennox 75M49 24V Solenoid for Reversing Vlv

24V Solenoid for Reversing Vlv

The Lennox 75M49 24V Solenoid for Reversing Valve is designed for your heating system. Lennox, quality through and through.

The Lennox 24V Solenoid for Reversing Valve is used to direct the flow of gas supply to either heating coil or cooling coil.

The Lennox® 24V Solenoid for Reversing Valve is an accessory component of the Lennox® WIFI Wireless Thermostat™. The valve limits water flow into the expansion tank in the event that the reversing valve malfunctions and allows water to flow in reverse.

The LF24S is the replacement Solenoid for the Lennox LF24A Reversing Valve. This Solenoid can be used to replace the original if it stops working or to make sure you have a second one on hand for future use.

The Lennox 75M49 24V Solenoid is made with the highest quality standards, ensuring great durability and dependability. It is designed for use on reversing valves that are compatible with a 3/8" push-fit. This high-quality Lennox service part features a 1/4" female NPT connection and is used as a reversing control solenoid. It also maintains accurate temperature control, which helps to extend the overall life of your heating system.

This Lennox 24V 2-position reversing valve solenoid features cast aluminum and plastic construction, 24VAC solenoid coil, and an arc suppressor.

Reversing valve solenoid with integral driver for operation from a 24V power supply. The sensor is supplied with an integral hairpin actuator and fitted with a flexible cable. This solenoid valve can be used in conjunction with the reversing valve to extend the air flow direction controlled by a normally closed actuator. This is required when the unit experiences high differential pressure, or when the pressure difference between inlet and outlet are too great.