My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account
Free Shipping
In stock
1 days
Motor Actuator
The Motor Actuator is for a Buick, Cadillac, Chevrolet, and GMC vehicle that has a dual zone HVAC system. The Motor Actuator is for both Driver and Passenger side applications. The motor actuation systems ensure minimum energy loss while enhancing the speed of climate control command signal response and minimal variation in air distribution temperature and volume.
The ACUTE : S.R.P.s 12-13-0036 Motor Actuator is a Liebert brand motor starter and a permanent split capacitor type. It provides control of system fans and motors in air-conditioning, heating and refrigerating systems. The starter has 32 mm (1-1/4 in.) wide base which provides support to the motor shaft to prevent motor from overturning or vibrating. The base length can be extended up to 17 mm (5/8 in.) on request.
The SWH-P1 Motor Actuator is designed to convert 24 VDC to 115 VAC for mobile applications in LIMS and other manufacturing equipment.
The 77W92 LenoX® Motor Actuator provides protection for HVACR equipment in the event of an electrical failure and meets NEC
The 77W92 is a microprocessor-based motor-actuator control system designed for high performance and ease of installation. It monitors all operational parameters and provides diagnostic information via an integral webserver making troubleshooting, monitoring, and maintenance more efficient. The 77W92 has a total of 4 controls to manage indoor blower and compressor contactor coils, blower motor overload trip, PWM blower operation, defrost circuit heating, holding coil temperature settings, and heating mode load shedding.
These AC permanent split capacitor (PST) series motor actuators are designed for use in high temperature applications, specifically up to 400°F (204°C). They are ideally suited for use in the commercial HVAC industry. These single phase units are available from 1/3 to 6 h.p. and have been approved by AHRI and C-UL listed. They comply with most industry standards for hot gas expansion systems. Package quantity is a standard 10 per carton and include special plastic clips for mounting an optional remote sensing device
Our 77W92 is a single phase oil pressure motor actuator. It has 2,700 watts, 208/277 volt, 1.5 HP and is for low amperage start control. This is a non-programable speed control unit.
1 days
LENNOX
Actuator MotorThis Lennox 77W94 Actuator Motor is a genuine part, made by the brand you trust. This high-quality Actuator Motor by Lennox Air Conditioning and Heat Pump Co. features include: Product...
LENNOX
MOTOR MOUNTOur Corporation MOTOR MOUNT is designed to dissipate the unwanted heat or vibration generated by a motor or other equipment. They provide excellent service, and are easy to use...
LENNOX
MOTOR MOUNTLennox Corporation 78L41 Motor Mount is a 143-071.A motor mount is an important thing and it has to be of good quality. It needs to be able to withstand high temperatures and vibrations...
LENNOX
ACTUATOR MOTORThe ACTUATOR MOTOR, is designed to meet a wide range of application requirements such as beverage, dairy, canning, and food service industries. For optimal performance, the ACTUATOR...
LENNOX
460V 2HP MOTORThe 460V 2HP MOTOR is a 80W77 replacement. Specifically designed for use in heating, ventilation and air conditioning applications, the 460V 2HP MOTOR features a pulley on both ends of...
LENNOX
Programmed Motor ControlThe 10Y54 is a programmable motor control that runs 208 and 230V motors. The control has a "status response" that lets the customer determine the exact status of the motor,...