LENNOX 80K28 Corporation Low Pressure Switch

".43""wc SPST Pressure Switch"

This Lennox pressure switch is built to last and create full-body humidity in your new or existing Lennox system. It provides 8""wc of heating capacity, ensuring that you'll be able to heat large spaces while conserving energy. Its temperature range is 60°F to 95°F, so you can count on it to meet all of your comfort needs, even in the coldest winters.

The most advanced Lennox controls ever, developed exclusively for the new TraneXR Series Residential Air Conditioners. These new residential "TEAM" control options include the Ethernet Gateway interface, which provides remote access from any wireless IP-enabled device, including computers, tablets and smartphones. The new 80k28 Low Pressure Switch has an operating pressure of 4 to 28 in. wc (8 psi to 200 psi). This switch can handle the same duty cycle as a ribbon and piston type of 7.5 on/15 off switch while providing the benefit of automatic system diagnostics and service notifications.

The Low Pressure Switch is a safety pressure switch that uses 2 screws and 3 wires to complete its installation. The unit has a 3/8"" compression inlet, a 1/4"" outlet, and an SPDT operating head. It is for use in air conditioning, heating and refrigeration systems.

45 psi. Normally Open, N.O., Normally Closed, N.C., Pressure Switch available in 14 different Voltage Ratings and 4 different Pressure Resistance Classes (PSC)

The Lennox® 80K28 is a single pole, single throw pressure switch. It combines an adjustable spool with a non-shorting cover. Unused cable can be stored on an integral terminal strip. The device is suitable for 415V and 480V applications in heating and air conditioning systems.

The 80K28 pressure switch is used on Lennox 15/20 HP through 20 HP naturally aspirated Residential Gas Packaged Furnaces.

The 8P600 is for applications that require lower pressure ratings. The 8P600 switches used for liquids operate well in subfreezing temperature applications, but are not designed to operate where air temperatures are below -39°C (-40°F). These include oil coolers on industrial pumps, water heater heat exchangers, and metal fin air conditioners up to 30,000 Btu per hour.