LENNOX 89M95 - Dual Run Capacitor 80/5 MFD 370V Round

80/5M 370V Dual Round Capcitor

This dual run capacitor features a 1-phase voltage of 370 volts and a 1/6 horsepower. It has a form factor of round and a capacitance of 80/5 megafarad.

The LENNOX 89M95 is a 350 Volt Capacitor with a Dual Run. The manufacturer series part number for this item is 89M95/3-PF(B). This Round Capcitor has a capacitance of 80 MFD and a voltage rating of 350. The capacitors physical dimensions are 5" Long by 4.68" Wide by 4.5" Deep and its weight is 0.32 Lbs. The Capacitor is made with an Operational Amps @ 210°F (110°C) of 3.1Amps, Ylem, Nome

The Dual Round Capacitor will operate both the left and right positions of a Lennox SIAP. The Capcitor can also be used to clear out any non-failing thermostats that are restricting your system from running to full heat output. Check operation of this capacitor by placing it in position T2 of the Lennox SIAP as described in the Lennox installation manuals. If the test position T2 does not increase to 110% or greater efficiency, replace the capcitor with a new one.

The 89M95 Dual Round Capacitor is often used as a replacement for older capacitors in Lennox Pulse Air Handling Units. It is also designed to be used with the new Lennox Pulse Comfort Control Systems (PCS)

A dual run capacitor is a capacitor which is designed to handle higher flow rates of AC electricity. These capacitors are used where two or more devices must be connected to the same power supply, often in large industrial buildings. The more common design would use multiple single run capacitors, however these devices operate less efficiently at high current because of the power dissipation in the internal resistance. A traditional dual run capcitor operates by providing both DC and AC paths though a common winding. The DC path uses only 2 connections to the capacitor terminals, whereas the AC path uses all 4 terminals on each half phase. In this manner

Lennox dual run capacitors are designed to produce the required voltage and cycle life for your system. These capacitors have a polypropylene case in a metal embossed tin-coated steel enclosure and are capable of withstanding operating temperatures from -30 to +105 deg. F. Capacitor allowances can be maintained by the use of a drop in capacitor which have less watt density output than those with an enclosure or a framed capacitor.

The Lennox CAPXX series is a low-profile design with dual capacitor construction. The capacitor and quilt are assembled to the case by means of high-voltage vulcanized (HVV) formed case leads, which improve electrical performance and ensure field reliability.