ARMSTRONG AIR 97M78 100484-24 Kit-RFC (.076)

Kit-RFC (.076)

The Armstrong Air 97M78 100484-24 Kit-RFC (.076) uses an expansion valve to control refrigerant flow to a reversing valve, which typically delivers colder air. The Armstrong air conditioner compressor has been thermally protected, and it is designed for reliable long term performance when matched with the Armstrong Accu-Cool Receiver Dryer.

ARMSTRONG AIR 97M78 100484-24 Kit-RFC .076 Pneumatic Fittings. The Armstrong quality you expect with superior service always!

Armstrong Air 97M78 100484-24 RFC Kit (0.076)

The Armstrong-Air 97M78 (RFC) is a quick change filter kit that allows for re-use of the original filter core. This kit is made specifically for the Armstrong Air V1010 and V2010 air compressors.

Makes the installation of Armstrong air duct insulation quick and easy - from all manufacturer's products and most competitors'! This kit contains 25 RFC (Radial Fiberglass Cloth) pre-cut panels for use with all Armstrong air conditioning thermal insulation products. Each panel is 24" long and 9 1/2" wide. These fiberglass panels fit into most standard 4'x24' registers, can be cut to fit smaller registers and will not break or tear as do fiberglass blankets or batts. A total of 25 panels will cover 25 sq. ft.

Standard service kit in all AirMaster® furnaces for use in high efficiency two speed XL920, XL922/XL923, XM927/XM934/XM975, AM100/AM101/AM102 (including package units) furnaces. Includes everything you need and nothing you don't—filter drier, vent damper slowly closes on low pressure call, dirt sensor with large temperature differential, auxiliary air system fine tune valve and LCA service back at the factory as standard equipment.