Level Probe, Water Z070178 GROEN

Level Probe, Water

GROEN Level Probe, Water for Z Series, Model Z070178

GROEN Level Probe, Water with Zoning System

The Level Probe is designed to be attached to the hot water tank. It has a 1/4" diameter, flexible cable that extends 8 ft. with stainless Steel probe. The cable is fitted with a hood to protect the probe from damage or abrasion during installation or removal. 1/4" cable fitting attaches condensate pipe Conduit adapter for 3 1/2" NPT pipe condensate pan Connects directly to model 1M2003 Drain valve, allowing drainage from the water heater to be controlled from this device

Water is an important part of the master bath or shower. It can also be a big problem when it starts to leak onto the best dressed floors. That's why Grohe offers the Z070178GROEN Level Probe for your Grohe sink, bathtub or shower.

No matter what you're up to, water can be a tricky thing to deal with. But with this handy level probe, you never have to worry. This durable sensor comes with a watertight cap that's easily removable for easy cleaning, and its long cord means that you can use it from virtually any distance.

The Water Level Probe is used to monitor physical water levels in various tanks, containers, vessels, wells, ditches, ponds, streams and irrigation channels. The probe is fitted with replaceable thermistors for measuring water temperature.

A level probe is a sensor that detects when a fluid is at a certain level. The probe can be battery powered and it communicates to a level controller, which then switches an output contact on or off.

The level probe is a small device that indicates whether the liquid level in a tank is too high, too low, or within acceptable limits. This probe can be used to prevent water backup and flooding in sewage systems, as well as detect low coolant levels in refrigeration systems.

Water level probe, from Groen, that detects the presence of water and sends a signal to a wired controller. This probe can be used to detect water levels of HVAC, hydronic tanks, swimming pools, and more.

Leveling probe simplifies set up of irrigation systems.

Easily determine the perfect water level in your monitoring well or irrigation system to make sure you get the right amount of water to your plants and grass. The 1/2" Diameter probe is 1-1/2 feet long and can be inserted into soil without any tools. Data hold and auto power off functions will ensure that you don't lose your place or waste energy while watching your display. This level sensor is used to check if a liquid surface is below, even with, or above an expected value. It gives you the assurance that the correct amount of liquid remains in a reservoir, tank or other container.

The water level probe is for outdoor use. The probe is used to monitor the water level in a lake, pond, or other non-pressurized application. It will shutoff the pump if the water level falls below your set point.